Question about HP OfficeJet 6110 All-In-One InkJet Printer

1 Answer

Printer is not printing at all

Bought two new cartriges, but the printer will not print at all, one can see the printer head moving, but when it finish printing nothing appears on the paper.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Simple steps to solve
1. ensure power is given and LED is glowing.
2. Paper if put in the right place
after this if it is not working means cartridges are defective

Posted on Dec 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Lexmark printer 1270 only prints in black and white although the colour cartriges have good ink levals. This has just started happening, it was happily printing in colour not long ago. Many thanks.


Jast go to print option. Then Mantainance. Then try to print a nozzale. If all the colour comes out properly ( with out dot or misline), your cartrige head is goog for print. If not, your printer cartrige head is block. To reque from the problem follow the proces:
1. Unpluge colour cartrige.
2. Try to clean the cartrige head with soft cloth and amonia gentaly.
3. Try to out the ink through the head nozzale pore by using shaking or gentaly swape by soft tissue.
4. Now put the cratrige head upon a soft tissue. ( ink will comes out). If not, repit stage 1-4 until ink come out.
Thank you

Jun 07, 2011 | Lexmark X1270 All-In-One InkJet Printer

1 Answer

.i used to have get good bright colored pix but


Try removing the print head again, removing the ink and re-cleaning the print head. Once it has been cleaned leave it to air dry for a few days before returning it to your printer and make sure the ink cartridges are fully clipped in. Let me know how you get on.

Mar 01, 2011 | Kodak ESP 5 Printer

1 Answer

After cyan ran out, installed new cartrige. Printer produced everything colored blue as red. Purchased new cyan cartrige and the problem recurred.


The problem seems from your new cyan cartridge.
It doesnt print cyan ink.
Try to clean print head and test print for each color
from the utility menu

Sep 09, 2009 | Epson Stylus CX6000 All-In-One InkJet...

1 Answer

Can't switch up my Canon iP3000 printer


Problem solved - I bought a new printer. On a long run it is cheaper.   Thanks    Mila

Apr 10, 2009 | Canon PIXMA iP3000 InkJet Photo Printer

1 Answer

Wont print


I had this problem recently with my IP90. Both the black and color heads were clogged. After running the "canned" routines several times to clean the heads and deep clean the heads...still didn't help...here's what I did:

1. open the top lid to have the cartridges that are inserted in the print head move to the middle of the printer.
2. remove both cartridges
3. What is left there is the print head holder. Slightly move it to the right and gently lift the print head lock.
4. Grasp the print head and lift it out of the tank.
5. Have several paper towels hand and know that you will have color and bw ink on your fingers
6. Put the print head on the paper towel
7. Pour rubbing alcohol on the blk and color heads and let them sit of about 10-15 minutes.
8. after that dry the heads and re-insert them in the printer
9. I put new cartridges in the printer and ran clean and deep clean a few times.
10. My color and black and white print came right back!

Hope this helps.

Mar 17, 2009 | Canon PIXMA iP90 Mobile Printer

2 Answers

IP90 WONT PRINT BLACK


I had this problem recently with my IP90. Both the black and color heads were clogged. After running the "canned" routines several times to clean the heads and deep clean the heads...still didn't help...here's what I did:

1. open the top lid to have the cartridges that are inserted in the print head move to the middle of the printer.
2. remove both cartridges
3. What is left there is the print head holder. Slightly move it to the right and gently lift the print head lock.
4. Grasp the print head and lift it out of the tank.
5. Have several paper towels hand and know that you will have color and bw ink on your fingers
6. Put the print head on the paper towel
7. Pour rubbing alcohol on the blk and color heads and let them sit of about 10-15 minutes.
8. after that dry the heads and re-insert them in the printer
9. I put new cartridges in the printer and ran clean and deep clean a few times.
10. My color and black and white print came right back!

Hope this helps.

Jan 30, 2009 | Canon PIXMA iP90 InkJet Printer

1 Answer

Head probs


How long u have the cartrige?
If it is a new cartrage make sure you remove the plastic that cover the printing head. (at the bottom)
Tell us more... info
Thanks
Jaywizz

Nov 19, 2007 | HP PSC 1210 All-In-One InkJet Printer

1 Answer

Cartrige refilled reset but no colourprinting epson stylus c66


Clean the print head/Control panel>right click on c66 and go to printing preferences>maintenance tab>print head cleaning>do it 3 times and then try to print

Nov 02, 2007 | Epson Stylus C66 Inkjet Printer

Not finding what you are looking for?
HP OfficeJet 6110 All-In-One InkJet Printer Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96396 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...