Question about Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

2 Answers

Dishwasher is stuck on rinse and hold

We can not run the dishasher at all it is stuck with the light on rinse and hold

Posted by on

  • Anonymous Dec 24, 2008

    our dishwasher is stuck on rinse and hold and it wont do anything else

  • cmurray2489 Mar 25, 2009

    I have a similar problem, however when I trip the breaker to reset, the control panel at Normal Wash reads 96 min then goes straight to 18min Rinse and Hold...won't get out of 18 min Rinse & Hold.



    Thanks.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I had the same problem, just today!! Reset your dishwasher... with either the fuse or the breaker... I did it and it works just fine now. Good luck. No need to buy anything just yet!

Posted on Mar 18, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 32 Answers

You need a new control board and/or touchpad

Posted on Dec 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

'low rinse' stuck on with full rinse aid, can't start wash cycle


Actually, if you look closely at that Low Rinse button or emblem, you will see a little lock symbol above the words "Low Rinse", and I'll bet THAT light is the one that is on. Basically, you have the control lock (or child-lock) turned on. To turn it off, you have to press and hold the Sanitize button for 3 to 5 seconds until that light goes off. Now your dishwasher will work!

Mar 11, 2015 | Samsung DMT400RHS Builtin Dishwasher

1 Answer

'low rinse' stuck on with full rinse aid, can't start wash cycle


Actually, if you look closely at that Low Rinse button or emblem, you will see a little lock symbol ABOVE the words "Low Rinse", and I'll bet THAT light is the one that is on. Basically, you have the control lock (or child-lock) turned on. To turn it off, you have to press and hold the SANITIZE button for 3 to 5 seconds until that light goes off. Now your dishwasher will work!

Mar 11, 2015 | Samsung DMT400RHS Builtin Dishwasher

1 Answer

Trying to start it have put it on the 60-70 Green light is showing 03 with a red star light lit up in the same panel and dishasher isn't going.


You have an interlock problem,there is a switch that isnt being made ,probably the door switch since it gets the most work

Feb 15, 2011 | Whirlpool 24 in. ADP5966 Free-standing...

2 Answers

The hobart lxih is stuck in delime.


To reset or clear delime message, on control board there are 3 buttons. from power off, drawer open, manget on door switch, door closed, hold PROG on board and press the ON key on keyboard. pressing select moves to next poption, up arrow increases setting. step through select until you see delime, settings for LXi are de for disabled, and 1 through 65= x100 cycles. rg if set at 5, after 500 cycles the message apears. To keep the settings and clear the message a delime sequence needs to be run precisely as described.

DO NOT MIX DELIME ACID, RINSE AGENTS OR OTHER ACID WITH BLEACH PRODUCTS, OR HAZAEDOUS GASES WILL FORM.

With machine off, remove rack , close door, press and hold wash/delime key and press ON. Delime will be lit on display, release wash/delime key, and let machine fill. you should then see ADD and DELIME on the display, open the door and add the delime agent following supplier's instructions precisely. close the door, press wash, delime will flash. After delime is complete power is turned off. Inspect the machine and repeat if necessary.
DO NOT LEAVE THE ACID IN ANY LONGER THAN RECOMMEDED.

Jun 18, 2009 | Hobart 24 in. LXIH-3 Built-in Dishwasher

2 Answers

Bosch shu5304uc/u06 does not drain


sounds like the pump has something in it or the drain line is clogged or kinked some how

Jun 07, 2009 | GE Nautilus 24" Built-in Dishwasher

2 Answers

Dishwasher does not clean dishes and leaves spots on everything!!


You need 2 things. Slightly hotter water and a rinse agent. If you don't heat dry your dishes, crack the door 3 or 4 inches after it's done, to let the steam out.

Mar 04, 2009 | KitchenAid KUDK03ITBK Built-in Dishwasher

1 Answer

Bosch SHX46A02Uc/21


it is likely a control module issue. I will take mine apart this weekend to verify what others have said: solder joint on circuitboard burns out from possible overheating, and DW doesnt go into rinse cycle. Try rinse and hold cycle to see if it stops on its own. mine does, but the other cycles which require the rinse to go to 156 degrees do not; the continue to run until I cancel and drain.

Feb 01, 2009 | Dishwashers

Not finding what you are looking for?
Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher Logo

551 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Dishwashers Experts

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Frigidaire Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...