Question about Washing Machines

Open Question

Frigidaire front loader washer model ATF700EGO

DISPLAYS A MESSAGE FLASHING "E 20" WHAT DOES THIS MEAN....CLOTHES REMAINS SOAK....PLEASE HELP.....

notice your ad...free

Posted by on

4 Suggested Answers

scottowa
  • 87 Answers

SOURCE: my frigidaire front loader washer will not fully

An e20 error is a slow drain. Basically you have a clogged pump. I just had to unclog one today! Unfortunately they are a little hard to get at. Usually they have a small sock or coin stuck in them. The pump is located in the right back. Good news, no cost to fix, bad it's just going to take some time.

Posted on Jul 07, 2009

  • 1294 Answers

SOURCE: how to soak white clothes

You don't have to do the soaking. Use powders for 'front loading machines'. Read your users' manual. There will be settings for woolen clothes, cottons, quick wash, long wash,etc......

Posted on Jun 10, 2008

  • 1314 Answers

SOURCE: frididaire front loader problem

send me an e mail at b4829@yahoo.com

Posted on Jun 17, 2008

wrehab
  • 91 Answers

SOURCE: Bleach is eating holes in

Add your bleach with less potency but make sure you are putting it where it is suppose to go and when you are supose to add it , it makes a difference.

Posted on Jan 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cannot find my pump filter on my front loader washer.


mine is front right hand side underneath the washing machine

Feb 12, 2012 | Frigidaire Washing Machines

1 Answer

Need to buy a door model atf700ego


I couldn't find a Frigidaire ATF700EG0. Is it 'ATF7000EG0'?

If so, here is your new door:

http://www.repairclinic.com/Model-ATF7000EG0-ID-894868-Door-Parts?s=t-atf700+-%3d%3dd894868c69

Good luck from Detroit, MI.

Jul 11, 2011 | Frigidaire ATF6000ES Front Load Washer

1 Answer

My front loader, model #FTF30ES1 won't spin out


This could be due to water discharge. Clean filter/ pump if needd be could also be slow motor speed , worn belt/ brushes in motor. good luck

Nov 13, 2009 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Code error problem


THIS IS TEMPORARY FIX, NOT A TOTAL SOLUTION. jUST TO GET WATER TO DRAIN AND RESET WASHER. , WITH WASHER POWERED OFF, PUSH AND HOLD START BUTTON FOR 4 SECONDS, RELEASE FOR 4, PUSH FOR 4 RELEASE FOR 4 UNTIL THE FRONT ALL LIGHTS UP AND DISPLAYS 88. sOON YOU WILL SEE YOUR CODES FLASHING, PRESS START BUTTON AS MANY TIMES NEEDED TIL NO MORE CODES FLASHING. tHEN WASHER WILL GO INTO DIAGNOSTIC TEST. aFTER THAT I DO NOT KNOW, BUT YOU CAN WASH 1 LOAD OF CLOTHES AND THEN PERFORM DIAGNOSTIC TEST AGAIN. THAT IS WHAT I AM DOING JUST TO HAVE A WORKING WASHER TOO MUCH TO FIX FROM WHAT I AM READING, SO GOING TO BU A NEW ONE ANYTHING BUT KENMORE. gOOD LUCK, HOPE THIS HELPS FOR IMMEDIATE RESCUE.

Jul 24, 2009 | Kenmore HE2 Plus Front Load Washer

1 Answer

My frigidaire front loader washer will not fully drain water and leave clothes soak and display an E20 code


An e20 error is a slow drain. Basically you have a clogged pump. I just had to unclog one today! Unfortunately they are a little hard to get at. Usually they have a small sock or coin stuck in them. The pump is located in the right back. Good news, no cost to fix, bad it's just going to take some time.

Jul 07, 2009 | Frigidaire ATF6000ES Front Load Washer

1 Answer

My front loader washer displays the letters "EFO", what does it mean


It can mean one of two things. You did not use an HE ( High energy detergent) or you used to much so there are too many suds in the washer. It can also mean that if you are using warm water, the hot water is not coming in, so you would need to make sure the hoses are connected correctly, the hot water is turned all the way on and that the little filter at the end of the hose (washer end) is clean.
Thanks

Jul 01, 2009 | Frigidaire Affinity ATF6000F Front Load...

1 Answer

Frigidare front loader washer error message 20


If you open the top of the washer , there is a "tech" sheet in there to tell you how to reset the error codes.

My washer started this. Then stopped spinning. Now it will not even wash a load. It stops mid-cycle. The ER 20 means that something is not draining right. We checked all of the tubes leading to the pump. Nothing was clogged. The technition seems to think it is a motor controller error.

Oct 27, 2008 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

I have a Fridgidaire Front Loader Washer _ Affinity. It has an error message flashing. E10. What does that mean? What do I do to fix it?


I have a Fridgidaire Front Loader Washer _ Affinity that flashed the E10 error code. I also had the problem with the fabric softener dispenser not emptying, and staying full of water. The problem was the cold water filter on the back of the washing machine that was semi-plugged. Cleaned the filter and now works perfectly. My machine is no longer flashing the Error code 10. The dispenser works perfectly.

Oct 05, 2008 | Frigidaire Affinity ATF7000ES Front Load...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...