Question about Gateway PC Desktops

1 Answer

I OWN A GATEWAY COMPUTER SRL. NO. 0031624856 EVERY THINH WORKS PERFECT I JUST CAN'T GET THE VOLUM TO GO UP

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Hi,
Do you have speakers attached or are we talking about the built-in speakers? Have you looked down in the right corner of your screen on your toolbar where you probably can see the time and look to see ifyou have an icon that looks like a little round, grey speaker? Double click on that icon and turn the volume up if you can?
Let me know if any of this works/makes sense.
Thanks,
Kaj

Posted on Dec 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gateway zx4951


Pay attention to steps 6 & 7

Here's some tricks I would try...
1. Verify the monitor's power cord is plugged firmly into the wall outlet and the back of the monitor.
2. Verify the monitor cable is firmly connected to the computer and the monitor.
3. Verify that you have turned the monitor power switch on.
4. If the power light on the monitor is not on, test the wall outlet (plug in a light or something you know works).
5. If the power light on the monitor is not on, try a different power cord.
6. If the power light is on and yellow or orange or flashing, but nothing displays, or the display is incorrect, borrow a monitor from a friend. If that works, your monitor probably needs replaced.
7. Also, you could try your display on a friend's computer. If it doesn't work, your monitor probably needs replaced. If it works properly on your friends computer, the problem may be with your computers video output port, motherboard video chip (or video card, if you have one), or drivers.

Jul 07, 2014 | Gateway PC Desktops

1 Answer

Hp wireless keyboard not working


exact key board driver install then try
what keyboard model?
download load driver for keyboard
update keyboard driver

May 16, 2012 | HP PC Desktops

1 Answer

My gateway dx4300-03 starts up fine and then about 5 minutes into working the monitor goes blank and the computer seems to go into sleep mode and won't restart until I unplug from the back and re plug in. ...


By Cyclontech!

Hi, The solution to fix the problem is by changing your power supply. Just make sure that you replace it with a 500W or higher and not with the same 300W which does not have enough power for this system, plus it is defective. I have changed the power supply to 4 diferent gateway PCs same model dx4300. And all 4 are working perfect. And run a check disk on CMD to fix the disk errors that were created every time you unplugged it and turned it on again.

Oct 28, 2010 | Gateway DX4300-03 Desktop PC

1 Answer

Cannot "unmute' -volume control


First, check the connections and make sure you have everything plugged in correctly. Restart the PC...try clicking on the icon again...if that doesn't work, post back and we'll try to figure it out.

Jul 12, 2010 | Gateway GT5220 PC Desktop

2 Answers

Gateway 310T Audio onboard chip is not


download the sound driver ... get the motherboard model and specification.. their you can see what's the name of sound card you need to download...

after downloading install it..

regards

Mar 17, 2010 | Gateway 310 T PC Desktop

1 Answer

I have a gateway computer my speaker are not working no audio I've checked the drivers they are ok and the connections are good ,when I checked the control panel ( audio devices) I noticed It said no audio...


on your keyboard if there is a button or two for volume check to see if the volume is on from there. you can also check the volume from your desktop just go to your taskbar.

Nov 20, 2009 | Gateway GT5220 PC Desktop

1 Answer

Default Gateway - blank


let me just ask for some info, they told you your default gateway was blank, this is not a problem with a card in your computer, it's jsut as setting in windows. What Windows do you have running ?

Also your old router was likley perfectly fine, you basicaly need to change your computer network settings to DHCP which lets the router asign an IP address to your c omputer, it sounds like you had a static setup on your old router, or someone has changed something without you knowing. it takes less than a minute to sort out if thats the pr oblem.

let me know.

Apr 11, 2009 | E-Machines eMachines Desktop PC

1 Answer

My laptop's volume is not working when i check its status it says it is operating correctly. the volume meter shows sound is being produced but i hear nothing


My Gateway laptop volume control on the case has a mute option when you push on it, if thats not the issue you may want to consider removing the audio drivers and reinstalling them.

Aug 12, 2008 | Gateway PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gateway PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you a Gateway PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...