Regency wall oven and the glass for the top oven is broken
I have a Regency wall oven and the glass for the top oven has broken. I tried to get a replacement from the Regency, but there aren't any left in the country. Other than the glass being tempered is there any magic to the glass that would provent me from me replacing it with black painted tempered glass?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There is a plastic cone on the back, bottom of the top rack. The cone must push into the water tube in the back wall otherwise noo water will get to the top. Make sure the clips holding the cone in place are positioned correctly.
The problem is in the pump not the arms. must take the top of the pump off to cleen out the glass. if you try to run it without getting the glass out it will distroy the pump blades and it will need to be replaced.
The broken bottom arm is probably preventing any water / water under pressure to get to the upper arm.
After you replace the lower arm, you should have much better cleaning in the top shelf.
While you are in there replacing the lower arm, recommend you remove the filter under it and clean the filter and any debris you find. Be careful of broken glass!
If you remove the filter in the sump area underneath the lower dish rack (removing the screws to do so) you may find debris blocking/jaming the impeller area. Be very careful of almist invisible broken glass. Inspect the impeller to make sure it is properly in place and not damaged.
Confirm that the spray arms are not pluged.
If problems continue and the impeller is in good shape, the pump motor may be failing. Please get back to me if problems persist but also include the Make and Model number whe nyou do.
Ok you need to use plastic or rubber washers against the glass so it doesn't break. To stop the handle comming loose again you need to put "Lock Tight" on the screw threads then tighten carefully only untill the handle isn't loose. You can get this from any good hardware store. cheers
if youve acess below the filter screen ther is only 2 more screws holding down 2 more covers giving you acess to the chopper assy, this is where youll find broken glass and stuff hitting against hte chopper try to break up.. the first of 2 covers lifts right off,,, the second will require sorta prying up and off, beyond this no real acess to any more