Question about EMC CLARiiON AX150

1 Answer

How to configure AX 150 - EMC CLARiiON AX150

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 30 Answers

EMC offers a great documentation site.
Here is it:

You can select Install and you can create a great customizes doc for installation steps.

Generally you can configure AX150 from a web based interface.
Enter the ip addess of the storage processor and a java application will appears.
You should do the following:
1. Create raid groups
2. Create LUNs on raid group
3. Register the hosts
4. Add hosts and LUNs to a storage groups

Posted on Jan 10, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How can I come back to the initial configuration of a Fas250?

Connect to the FAS250 console by using the provided serial cable.

Logon to the appliance using username 'root' and the root password.

Type the following exactly as shown:
priv set diag
halt -c factory

The filer will reboot and ask for a fresh setup the next time it boots.

This should only be done if you are sure you really want to reset the configuration! This should probably only be done if you know how to then proceed and re-configure the filer.

If you do not have the 'root' password try resetting it. You will have to reboot the filer and type "ctrl-c" when prompted to access the special maintenance boot menu. Then choose the option for resetting the root password.

Aug 25, 2010 | Network Appliance NetApp FAS250...


What is a WEP Key?

Wireless networks broadcast messages using a radio and are thus more susceptible to eavesdropping than wired networks. Wired Equivalent Privacy (WEP) is the first in a line of increasingly secure algorithms that include WPA and WPA2 used to secure IEEE 802.11 wireless networks.

Setting WEP up is usually done from the wireless security tab of your router configuration, this is most often accessed from your computer using the web address http: by default. It consists of a pass-phrase and a key. the pass-phrase is used to generate an encryption key, this is then necessary to use any packets (Bits of data) transferred over the air.

Newer routers allow this configuration to be done through a visual application as well.

on Apr 08, 2010 | Network Storage Systems

1 Answer

I lost bios admin password in hp server dl380 g i want clean password without Remove the server cover. please help me.

Mfraid the only way to erase a BIOS password is to open up the case and remove the battery from the motherboard.

Aug 08, 2009 | HP ProLiant DL380 G5 Storage Server 9TB...

1 Answer

Bittorrent configuration problem

The new firmware already has bit-torrent capabilities built into it. Please do the following:

1. Download the latest firmware from D-Link website
2. Save your configuration in case there are any problems
3. Upgrade firmware from the DNS-323 menu

May 05, 2009 | D-Link Dns 323 2-Bay Network Storage...

1 Answer

Switching from 'Mirrored' to 'Striping'?

I don't understand your description. sorry. But if you are switching over from Mirror to stripping then you will surely loose your files. Switching raid configuration will also redo the hard drive relativity and will reformat the drives automatically. If your backup is a server then you need to go to system bios and configure the raid from there. I suggest backup the backups first before you do it. If your backup is an external hard drive then go to its http settings and configure it there. It will surely format your drive.

Dec 08, 2008 | GTech G-TECH 907205-01 G RAID 2 500GB...

1 Answer

How to reset dell AX150

This is a storage drive from dell.
Dell have quirky systems that are different to the normal run of the mill PC components.
I can only advise you to refer to Dell in this instance.

Sep 15, 2008 | Dell AX150 Single Processor Storage Array

1 Answer

Different RAID configuration?


The first point to note is that this unit does not support more than 1.6TB total disk. (4 x 400GB drives) This is stated in the manual which is on the CD that came with the unit. You cannot configure a mix of RAID1 and Linear (JBOD) drives, so you plan will not work.

Jun 18, 2008 | Network Storage Systems

1 Answer

Create LUN

Hi, Logical Unit Number(LUN) can be configured VIA web based inbuilt software on Hitachi. and for device configuration you can use either hitachi HDLM or Opstore to Monitor. Detail you problem so that I can brief you lot. By that time you can check Thanks Arun

Aug 22, 2007 | Hitachi Thunder 9500 V Series...

Not finding what you are looking for?

Related Topics:

1,671 people viewed this question

Ask a Question

Usually answered in minutes!

Top EMC Network Storage Systems Experts


Level 3 Expert

413 Answers

Brad Brown

Level 3 Expert

13561 Answers

Daily Mehdi
Daily Mehdi

Level 2 Expert

48 Answers

Are you an EMC Network Storage System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides