Question about Washing Machines
HL flashes if any overfill condition occurs. This condition occurs when excessive water in the tub causes the overfill switch to trip. The control must realize that the trip was due to an overfill condition instead of a suds lack condition in order for HL to be displayed
With an overfill condition, the beeper repeats a warning every 10 seconds with no time-out. The pump is cycled in drain mode for 30 seconds on, 30 seconds off until the overfill switch resets or power is discontinued to the unit.
Press STOP/CANCEL to clear the display.
Posted on Dec 17, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jan 25, 2016 | Whirlpool Washing Machines
Jan 05, 2016 | Washing Machines
Nov 21, 2012 | Whirlpool Duet GHW9150P Front Load Washer
Aug 26, 2011 | Maytag Neptune FAV6800AW Top Load Washer
Jan 22, 2011 | Bosch Nexxt 100 Series WFMC1001UC Front...
Jun 12, 2009 | Kenmore Elite 45986 Front Load Washer
Nov 30, 2008 | Kenmore 24902 Top Load Washer
Dec 14, 2006 | Tricity Bendix AW1400W Front Load Washer
143 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: