White lcd on my camcorder

my samsung vpd230 has stoped recording, just a black screen,
would you also explain what a ccp is,also the words memory stick keeps keeps appearing.thankyou

YOU CANT CLEAR IT. THIS SOUNDS LIKE THE TAPE TRANSPORT IS BAD. SOMETHING BROKE INSIDE TRANSPORT AND NOW IT WONT ALLOW YOU TO LOAD TAPES

samsung VP-W60 8mm camcorder cerco driver per scaricare video

i had same problem, solved it with replacing the lcd fpc lead (ribbon).this is the lead to the screen.it breaks after about three years.this is a common fault.. replacement part from Partmaster.co.uk or 0870 240 6603..part number..SAMAD9706489A. cost £11.40.. its easy to replace ..takes a little time.. i have emailed instructions to two others and they have sucessfully completer the task.. if i can help with instructions,please ask.. i have also purchaced a second ribbon for next time..(3 years time )..good luck stefan.

hi ..had the same problem..had advice from this site two weeks ago..which was spot on..the lcd screen ribon has brocken.. its available from partmaster..www.partmaster.co.uk...part required..no SAMAD9706489A..£11.49.. took me half hour to take camera apart (carefull.y) 10 min to put back togerther.. works brilliantly.. good luck.. Need futher help email me..stefjanet @yahoo.co.uk..

you have 2 differnet problems. white screen is a bad ribbon cable inside unit.. eject r is a bad tape transport. something broke inside or the tape transport is outta alignment.

Hello, the special flat cable connecting LCD panel with main board is broken. If you want I can supply you with further info (part number, etc.) at LIVE Expert Assistance. Best regards, Arpi

samsung vp-d351. lcd screen was bright white at first then suddenly went off (no picture). sound and everything else ok. can anybody help?

hi, I wish you wouldve given us more details regarding the kind of distortion you get on the LCD screen. if objects kinda fuzz out, it can be related to worn headdrum, i.e. worn heads. The heads are tuned with the input-capacitance of the PB-amplifier on the white-frequency of the recorded RF(is in FM with high frequencies on white) . The wear of the heads will decrease their inductance so the tuned frequency is going up.The video-amplifier and demodulator circuits can`t compensate it. Another reason can be a misaligned FM modulator( frequencies for black and white are not set correctly). Finally the AVC of the camera itself can be faulty. The guiding posts will never cause such problem but their setscrews tends to get loose. Tighten them carefully. Good luck

I HAVE A SAMSUNG MINI DV DIGITAL CAMCORDER MODEL SC-D353 NTSC.

THE LCD SCREEN IS NOT DISPLAYING. ONLY A WHITE SCREEN WITH VERTICAL STRIPES.

NO PICTURE DISPLAY IN 'CAMERA' MODE OR 'PLAYER' MODE. BUT THE VIEW FINDER IS WORKING.

DO NOT KNOW WHAT IS THE PROBLEM?

HAS LCD SCREEN GONE BAD. IF SO WHO DO I CONTACT. I LIVE IN SILVER SPRING MARYLAND USA

PLEASE HELP

LAKSHMI SHYAMSUNDER
EMAIL: lshyamsunder @ yahoo.com
Tel # 301-649-1371