Question about NorStar M7310 Corded Phone

1 Answer

Delete Extension We have a norstar system with 7310 and 7208 phones. I hae been instructed to disable an extension on our phone system and cannot figure out how. Can anyone help? I can get into the admin of the phone system but dont understand the menus.

Posted by on

  • phtechoftx May 11, 2010

    Do you have a programming overlay?



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Contributor
  • 52 Answers

To disable a local on the system you have to go into maintenace ok press feature * * config(266366) then password config (266344) this will get to programing the hit next till you get to maintenace that should work

Posted on Mar 19, 2009

  • terry gormley Oct 06, 2009

    You have to go into installer programming. Push the feature key and * * keys then type in 266344 [config]

    and 266344 again which is the password then go to

    maintenance this will lead you to disabling the local you want to disable. Hope this helps.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I make one extension on my Norstar M7324 phone system ring?

Hi J,

Do you mean how to make it ring when someone calls a specific phone number, or when someone calls the specific extension?

If for a phone number, then you need the line to appear and ring on the phone. Let me know which one you're doing.

May 14, 2014 | NorStar M7324 Telephone

1 Answer

Norstar M7310 getting Not In Service message

This message means that the system does not see a telephone connected to that extension. Check the extension that you are calling to see if it is operational. Check the extension number by using Feature *0 and pressing the intercom button.

Apr 05, 2013 | NorStar Meridian M7310 Phone

1 Answer

Norstar M7310 I cannot get the greeting from the last admin off of this phone. My greeting plays when the call comes in and it directs callers to the extensions, but after my greeting the old greeting...

The greeting is from the voice mail not your phone.
Logging In To a Mailbox From Your Own Extension
1 - Feature 981
2 - Pswd: Dial 4-digit password (default is 0000)
Follow prompts to change your greeting. They are: ADMIN, then GREET and then RECORD.

When done hang up or push RLS. I have installed several of these systems.

Mar 04, 2018 | Nortel Norstar M7310 Display Phone

1 Answer

On the Norstar system can i have 2 phones in the same socket like the normal domestic house phone extensions.

No, each phone uses 1 port in the system. 2 phones in the same port will cause the system to continually re-read the 2 sets.

Jun 21, 2010 | NorStar T7208 Telephone

1 Answer

Norstar phone m7324 1. What is the difference between the name of the "line" and the name of the "set"? 2. Is there a way to reset the lines other than unplugging the phone system? Four lines are showing...

1. You can name the lines, for example (Line 1, Line 2) - or - (5551234, 5551235). You can also name the sets (phones), so when Joe calls Mary, Joe's phone will display "Calling Mary", and Mary's phone will display "Joe calling".

2. Press the line button for the line in use and the display will show which extension is using that line. There could be a stck button on a phone that is tying up the lines. When you figure out which extension is causing the problem, try unplugging it to see if that clears the problem (it should). Then get the trouoble phone repaired. Good Luck!

Mar 15, 2010 | NorStar M7324 Telephone

1 Answer

What is a Norstar Overlay Template?

right top Show
right bottom Next
left top Heading
left bottom Back

Mar 23, 2009 | NorStar Meridian M7310 Phone

1 Answer

How to remove DND in Nortel N441

To disable DND on a Norstar system,
dial FEATURE # 8 5
from the set.

Feb 05, 2009 | Nortel Lands Phones

1 Answer

Setting Pulse/Tone

We have a problem with the m7310 norstar phones, since power went, we lost all configurations, and we cannot restore them back, extensions cannot call out they are disabled, please help us with the admin or system coordinator manual

Oct 13, 2008 | NorStar M7310 Corded Phone

3 Answers

Changing name in nortel T7316E handset

We would like to change the name displays on our phones

Mar 05, 2008 | Nortel Norstar 16-Line PBX Speakerphone

Not finding what you are looking for?
NorStar M7310 Corded Phone Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top NorStar Lands Phones Experts


Level 3 Expert

83810 Answers

Oloyede Monsuru

Level 3 Expert

1417 Answers

David Burbee
David Burbee

Level 3 Expert

1871 Answers

Are you a NorStar Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides