Question about HP Compaq Presario v3000z Notebook

1 Answer

I just purchased this system used, but only a few months old. I currently have Linksys wireless router and the AT&T module (plugs in the side of the computer at times). My other laptop works fine on the wifi. I cannot get this new computer to connect to the internet. I have installed the AT&T module and chose the linksys network, but nothing. Any ideas how to get it to work? It is a compaq presario V3000

Posted by on

  • beamkim Dec 18, 2008

    Thank you for the response, we got it working last night finally. It was user error on my part, just didn't know what I was doing! Merry Christmas

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 916 Answers

Trying cloning the mac address some isp's have started blocking home networks by requiring only one mac address the option to clone it should be in your routers wireless settings.

Posted on Dec 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have had 3 of the wrt-54gs wireless routers and all have exhibited the same problem. After I get them set up, they work fine for a few months and then the wireless portion quits working. Is this problem...


I doubt the 3 Linksys are all faulty.
Without more information, it is difficult to diagnose your problem.
What error messages are you getting?
Please click on this link and follow my instructions, it may solve your problem :-
http://www.fixya.com/support/r3559120-wireless_router_disconnecting
If you still have problems, please provide me more details and error messages.

Aug 23, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

Wireless router is not working


Go to Here for Linksys EasyLink Advisor (LELA). With this software you can monitor the routers status and troubleshoot.

Most trouble shooting involves disconnecting the power to the cable modem and the wrt54 router for about 10-20 seconds. Then plug in the modem until it lights, then plug in the router. The Advisor will then get a new address.

It also shows a graphic picture of your whole system.
81ec37f.jpg

I have a wrt54 and use this whenever I have a problem. I fix it then turn it off.

Hope this helps.

Good Luck

Feb 19, 2010 | Linksys Wireless-G WRT54GS Router...

1 Answer

I recently upgraded to high-speed DSL, and am planning on upgrading my computers. I currently own an older linksys 2.4 GHZ 54 Mbps router and just purchased the WRT400N thinking I would be able to get at...


My friend, current technology does not allow for these speeds via wireless. Wire is rated at 100 (cat 5) or 1000 (cat 6) while wireless is 10. Your Linksys will communicate with your modem device at the higher rate, but the wireless will be slower.

To get the 1000 speed, all devices attached to your 1000 rated network will have to be rated 1000; computers, printers, routers, etc. You must also use category 6 or higher cable to get that speed. If you have any device on a 1000 rated network that is rated at a slower speed, everything will slow down to that slower speed.

I am not a wireless fan for two reasons: (1) Speed (2) security. Normally, distance is not a problem - Current technology allows for a 300 foot radius circle around your router (perfect circumstances)

Now then, the salesman may tell you something else and there may be another question catcher come in and tell you something else. My comments are based on my own personal experience while operating my own networks.

Thanks for your interest in FixYa.com

Please vote

thanks

Dec 15, 2009 | Linksys WRT400N Router

1 Answer

I want to add a laptop - wireless to my current system. I have a linksys G 3.4 GHz. I need help.


Do you know the current wireless card settings that are working on your current system.
All you need to do is to configure these SSID and encryption settings etc on the wireless card on this laptop so it will communicate with the router.
If you have enabled MAC address filtering on the Linksys then you need to add the MAC address of this laptop to the MAC address Filter table in the Linksys wireless settings.
Let me know if you need further help.

Nov 09, 2009 | Linksys Wireless-G Broadband Router

1 Answer

Blinking power light - router not working properly


Blinking power light on the Linksys routers indicate 2 things. 1st is firmware problem, 2nd is the worst one which is defective router. You can still revive it if you can reload the firmware. If not, it's a dead one and you need to purchase a new one. And man, your router is a very old one. You must switch to wireless G router, its 5 times faster than your wireless B and it only cost 30 or 40 bucks

May 09, 2009 | Linksys BEFW11S4 Wireless-B Broadband...

1 Answer

Internet connection between linksys router


May be your router internet settings has been wrong. you must reset the router settings by clicking the router reset button. Pls locate the button and then put the internet cable into router internet port.

Jan 03, 2009 | Linksys Wireless-G WRT54GS Router...

1 Answer

SMC EZ Connect 2862W-G does not see Linksys network


It shows that your wireless router and wireless adapters are both working. One thing to try is changing your wireless channel. Since you are already using 11, try maybe 1 or 9. Check if your SMC adapter will pick up the wireless signal.

By the way, how far is your computer (using the SMC adapter) to your wireless router?

Oct 21, 2008 | SMC EZ Connect g SMC2862W-G 802.11g/b...

2 Answers

Router lights not coming on at all?!!!


could be a faulty transformer,,,,is the transformer stone cold or warm to the touch? i would exchenge for another

Jun 15, 2007 | Linksys A+G WRT55AG Wireless Router

2 Answers

LINKSYS WIRELESS - G WAG54GS


Diana, The router has lost its IP address from the ADSL gateway. Unplug the router from the wall for about a minute or two. Plug it back in..? If that doesn't work you need to login to your router and check the settings. or(there is a small reset button on the back of the router. Hold it in for 10 seconds the router will reset.) http://www.linksys.com/servlet/Satellite?c=L_Content_C1&childpagename=US%2FLayout&cid=1114037290855&pagename=Linksys%2FCommon%2FVisitorWrapper http://www.linksys.com/servlet/Satellite?c=L_Content_C1&childpagename=US%2FLayout&cid=1114037290855&pagename=Linksys%2FCommon%2FVisitorWrapper If possible turn your computers off while resetting the connection. Some inter Microsoft networks will issue its own IP if it doesn't detect one. Good Luck, Tim

Feb 07, 2007 | Linksys Wireless-G WRTP54G Router

Not finding what you are looking for?
HP Compaq Presario v3000z Notebook Logo

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18377 Answers

Tony

Level 3 Expert

2598 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...