Question about CDA CI532 Front Load Washer

Open Question

Instruction were can i find out what the symbols mean on the front of my cda c1532 washing machine . so i know what ash im putting on ? or any web site that could help thanks

Posted by on

4 Suggested Answers

  • 1462 Answers

SOURCE: cda c1532 front load washer

possible drain pump has a foreign object in it - access the impellor to see what you find or possible the pump has in fact failed. if you can hear a faint humming noise when should be draining, that indicates somkething jammed in the pump

Posted on May 20, 2007

  • 256 Answers

SOURCE: CLOTHS DID NOT SPIN ON DISPLAY THIRD SYMBOL

Check with the manufacturer's website for another owner's manual and review the code legend.

Posted on Feb 25, 2010

  • 3 Answers

SOURCE: Washing Machine CDA CI392 Model Manual needed

if you goto www.cda.eu you can download 1 from their

Posted on Mar 15, 2010

  • 1 Answer

SOURCE: I have a CDA ci992

Lisa set the time required on the Drying time control right hand side for high temperature up to 130 mins max and left hand side for low temperature up to 90 mins max. Now set the washer timed dial to the drying emblem (3 vertical wavy lines) next to position 8, then finally you need to push in all 4 control buttons on the left of the thermostat. It should now work according to my wife. Dave

Posted on Sep 11, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a CDA ci992 with no instruction manual. I cannot get it to JUST dry. I just need to know which setting to put it on. Any chance you can help? I've tried searching for an instruction manual...


Lisa set the time required on the Drying time control right hand side for high temperature up to 130 mins max and left hand side for low temperature up to 90 mins max. Now set the washer timed dial to the drying emblem (3 vertical wavy lines) next to position 8, then finally you need to push in all 4 control buttons on the left of the thermostat. It should now work according to my wife. Dave

Sep 02, 2011 | CDA CI592 Front Load All-in-One Washer /...

1 Answer

Please email manual for CDA C1330 washing machine as fault code keeps appearing


Hi from retired Englishman in SW France,
Sorry, this forum is not able to supply any type of manual, installation instructions, electrical or schematic diagrams direct; it's just made up of ordinary guys and gals, probably at home and from all over the world, with experience of addressing problems and giving guidance for free on the web ;-0)
Also members on Fixya are not 'affiliated' to, or representative of, any manufacturer at all, just using their experience gained probably over many years.
You will need to type into your search engine/web browser '(make model number) washer manual' and you should be presented with a number of sources from which you can either download for free or have to pay a nominal amount.
You could also try the manufacturer's web site direct ;-0)
If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C.

Jul 04, 2011 | CDA CI392 Front Load Washer

1 Answer

Trying to find instruction manual for a CDA Ci 592 washer dryer


Hi from retired Englishman in SW France,

I'm sorry if you are the person who has previously been unsuccessful finding a CDA washer manual on the web because this solution will not assist you ;-0(
However if you are NOT that person you will need to type into your search engine/web browser '(make model number) washer manual' and you should be presented with a number of sources from which you can either download for free or have to pay a nominal amount.
You could also try the manufacturer's web site direct ;-0)

If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C.

May 01, 2011 | CDA CI592 Front Load All-in-One Washer /...

1 Answer

Samsung front loading washer temperature sensor problem


It may not be your temperature sensor or thermistor. If you have a tE error code on your Samsung washing machine, first check the wiring. My Samsung washer had three visits by the repair tech. and new parts ordered again and again. I looked on a British web site and two people said that it turned out to be wiring broken in several places. Sure enough, I found a broken wire. Technician didn't look for that. Hope it's as easy for you.

Feb 18, 2009 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

CDA BI 1200 WD


It could well be the brushes on the motor, take them off and check them (ensure spring still intact and both are making good contact), put them back in, if it begins to work then it'll be the brushes not contacting porperly.

Oct 23, 2007 | CDA CI392 Front Load Washer

2 Answers

CDA C/392


you should e-mail service@cda.eu or contact them through their site; http://www.cda-europe.com/docs/CCD_Home.htm Hope this helps :)

Jun 25, 2007 | CDA CI392 Front Load Washer

1 Answer

Cda c1532 front load washer


possible drain pump has a foreign object in it - access the impellor to see what you find or possible the pump has in fact failed. if you can hear a faint humming noise when should be draining, that indicates somkething jammed in the pump

May 19, 2007 | CDA CI532 Front Load Washer

Not finding what you are looking for?
CDA CI532 Front Load Washer Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top CDA Washing Machines Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

noel
noel

Level 3 Expert

4740 Answers

ray gallant

Level 3 Expert

37696 Answers

Are you a CDA Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...