- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Install your usb charger cord to the system, and the controller before you turn it on. Then after you turn on the system, use a small pin, or paper clip to hit the reset button on the bottom of the controller. This solution works for all PS3 types, not just the fats. All that use Bluetooth controllers. Good luck. ^^
Have you tired resetting the AC adapter? If not, then try this:
Unplug/remove all accessories from the system (including game discs, SD Cards, memory cards, Nintendo GameCube controllers, hookup cables, the AC Adapter, and Sensor Bar) from the outlet and Wii.
Let the system rest for about 90 seconds. While you're waiting, check to see that controller cords, AC Adapter, and Stereo AV cables/Component Video cables are not frayed or have exposed wires (this can cause the system to shut off); if so, you should replace those parts.
After the 90 seconds, Plug the AC Adapter into the system and directly into a wall outlet, not a surge protector or power strip. Check to see if the power light on the Power button comes on.
ok this isnt really a problem, they will turn off after a min or two. just w8. not if this continues, like i said no problem. turn on your system and connect the usb cord to the controller. it should redirect the signal in the controller and well it should work good again. good luck