I have a HP laptop computer & do karaoke with it. Most clubs I play have coxial connection for their analog tv. what can I do to be able to connect to the TV`s. Other Karaoke people can do this with their computers,why can`t I?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Is the HD CCTV camera analog compatible? I would imagine not if it says HD in it's name. But you can try using a converter box with it because if the camera is outputting HD you need to convert it to analog which the TV can understand.
Hi, The answer to your question
is Yes. You can use a VGA to RCA converter and view the output on your TV. I am
assuming that you are using a Inspiron 1200 laptop. Couple of things you may
need to check. 1. Toggle display using Fn +
F2 (Hold down the Fn key and press the F2 function key), this will toggle the
display between Laptop, TV, & Laptop + TV . 2. Right-click on desktop,
goto display properties, make sure the second display is set to 800x600 or
1024x768, these are the only display resolution supported by analog TV’s Hope this helps. Please rate
your feedback! Thanks, VJ
On the back of your converter box and TV/VCR there are two coxial connections an (OUT) and an (IN): Step 1. Connect the coxial cable from the antenna to the (IN) connection on the back of the converter box. Step 2. Connect one end of a spare coxial cable to the (OUT) connection on the back of the convert box. Step 3. Connect the other end of the Coxial cable to the back of your TV. I hope that you find this solution helpful. Please take a moment to rate tis solution.
Connect your S-video output from the computer to an empty S-video input on the receiver. Connect your speaker output from computer to analog audio input on the receiver using a 1/8" stereo connector to RCA patch cable. You may have to set your computer to output video to the S-video jack, consult your HP documentation for instructions.
after you hook the cable up to the tv, go into the tv's menu to make sure the input mode is set to s-video. then go into the control panel on your laptop and find the settings for your video card and set the output to "TV" or "Clone"
Without the manual !! 1)VCR INPUT:: [Cable_antenna In] the coxial screws on from "output" of cable box or ( airwave )antenna. 2) VCR output:: connect another coxial into input of TV. You should be able to keep all the other wires connected from SONY theater system. note:: your VCR has a switch for VCR\TV. When u have a VHS tape playing a movie & switch from VCR to TV, you will see the channel that is on the VCR not the cable box\ antenna input. example:Cable channel is on Ch.122, & your TV must be set to Ch.3 to view cable.If your VCR is set to Ch/5 you may not see that Ch.122.You will still be able to see your VHS tape when u place the VCR\TV switch back to VCR. I am going to share wt.u a $100,000,000.00 trick:put any ch.on cable box.Switch VCR\TV to TV,change channel ON VHS tuner.When u come to the [picture] that the cable box is on,Then that is the Ch.u can see cable ON the VHS. U owe me!!