Question about Panasonic CT-36D32 36" TV

1 Answer

CT-36D12 One of the channels has no sound, one channels picture is fine but the weather plays for the sound. One channel is fine until the George Lopez show is on and then it comes out in spanish. Go figure, three different channels 3 different problems.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,284 Answers
Re: CT-36D12

Instead of explaining the SAP/Stereo function to you, the easiest way to get the TV back to normal is while the set is on press the ACTION and POWER buttons at the same time and hold them until the CHK screen appears. Once that does release the buttons and then press the action button again to exit the CHK screen. Your TV is now back to the factory settings and will need to have the channels programmed again. By the way the SAP/STEREO button on the remote should be near the upper left hand corner of the remote itself.

Posted on Mar 26, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have a Panasonic TV CT-34WX50 every time I change channels

it sounds that have problem in the chroma board ( video board ) a small board that hooked up in the neck of the picture tube. if the color is greenish the cause is dead in red video driver transistor or open resistance. hope this can help good luck.

Jul 26, 2012 | Panasonic CT-34WX50 34" TV

1 Answer

I don't have a remote for my Panasonic CT-32SC13.How do I change it to channel 3? Keeps skipping it.

On the tv, press,03 or channel up-down until you reach channel 3. hope this helps..

Mar 24, 2010 | Panasonic CT-32SC13 32" TV

1 Answer

Hello - two channels on my Panasonic TV (CT-27E13) have no audio. The rest are fine. Any Ideas? Craig

On the original TV remote press the SAP button on the top right of the remote. Keep tapping until the TV says stereo and this should fix the problem.

Good Luck and please rate this solution....

Jan 08, 2010 | Panasonic Standard (CRT) Televisions

1 Answer


You`re probably getting a on air channel which means that you have to check your cable connectors and splitter if you got any, switch with other sets if you can.

Nov 01, 2009 | JVC AV-36150 36" TV

1 Answer

I have a Panasonic TAU CT-27SC14J TV lost sound

Ur video/Audio board have a short or lose a connections.Must take it aparts retighten everythings,might even resoldiers the parts.

Aug 19, 2009 | Standard (CRT) Televisions

1 Answer

My tv is working with sound and was fine. I shut

Your picture is missing- after 5 days call 911

Mar 18, 2009 | Panasonic CT-36HL43 36" TV

1 Answer

The volume on my television has sound when playing dvd or vhs, but does not have sound when it is on a television channel.

that indicates that the amplifier is fine, the problem is that sound on a channel is combined sound and picture signals,
you can fine tune a channel,
if that is happening on all channels, a tv is suppose to alingned with a signal generator

Mar 17, 2009 | Orion STV2763 27" TV

1 Answer

Picture but no sound

press mute button on tv remote

Oct 20, 2008 | Zenith B27A11Z 27" TV

1 Answer

Suddenly no sound & no picture overnight: is my TV dead?

If you have static siugnal, sure TV is not dead.

Check the aerial cable, ensure it is well plugged in and getting signal.

If you are using a receiver box, check cables to TV and receiver (freeview, sat, cable etc.), try setting channels on receiver again, if it does not work but you get static, then either the cables or receiver are defective.

Test the TV on standalone , connecting it to an external antenna.
Tune again the channels, and save the preset.
If still no signal then the antenna socket on the TV may be defective.

Try using the TV with a DVD.

If you can watch DVDs, and TV is not keeping channels preset, and you tried all the above, at this point htere may be a fault in the tuner card inside tv.

Call the phone number listed on tv user manual to get support, and eventually repair it.

Oct 03, 2008 | Panasonic CT-36HL43 36" TV

1 Answer

No sound on my 8year old panasonic tv.

It worked fine yesterday. Sound on all channels. Sometimes the picture goes black on channel 6. We can get it back by going up one channel, then back to 6. it is due to cable signal ie weak. now there is no sound this is due to sound section 1 loose connect in sound section 2 speaker 3 problem in sound section some part must have failed.

Sep 17, 2007 | Panasonic CT-32SX12 32" TV

Not finding what you are looking for?
Panasonic CT-36D32 36" TV Logo

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66623 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Are you a Panasonic Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides