- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The instruction booklet can be found at: http://www.usaphone.com/pdf/guides/PANASONIC/PHONES/Panasonic%20KX%20T76xx%20Phone%20Oper%20Inst.pdf
Here is the way to conduct a conference call. Press conf then dial the number then conf. Do this for each caller you wish to add. When you add the last number and press conf, all parties will be on line.
Generally on most systems you have a conf call button or feature code. If so, You place the first call. press the conf call button. this puts that call on hold you either automatically get a second dial tone in your ear or you need to press a line key or dial 9. once the 2nd call is placed press the conf key again and the calls will be joined. This is a general description some systems have variations of this, Hope it helps.
A conference call can be set up two ways. If its two phones at your office dial or receive call on one phone, press Conf/trn and dial extension of second phone, have them pick up reciever and press Conf/trn again and all 3 are on. For two outside lines it must be configured on your system to allow but it is then establish a call dial conf/trn 9 + number wait for answer and press Conf/trn again. Your tutorials and guides are located here. http://guides.idacomusa.com/
1) Call to the first party and hold the line. 2) To add new party, press CONF + 2nd party phone no, after this talk and ask the 2nd party to hold the line. 3) Press CONF again and after a beep tone, then can talk with multiple parties. 4) To leave the conference, press CONF and after beep tone, lift down the handset.
If by conference you mean inside and outside parties connected together the answer is yes. You should have a CONF button on the set. You press CONF, dial your second call and press CONF again. You can press CONF again and do it all over again to add a 4th party. There are restrictions and the conference is not amplified.
Here's a User guide to Partner phones. pdf page 3 has CONFERENCE instructions.
With call in progress, ask party to hold.
Press Transfer, receive interrupted dial tone.
Dial desired number
After call is answered, press Conf. Conf LED lights.
Three-way conference is established.
If one party hangs up, other two remain connected. Conf light goes out.