Question about Polycom VSX 7000 Video Conference

4 Answers

Forgot the polycom VSX 7000 password - how to reset

We are not able to change the setting of polycom because we forgot the password. how can we reset the password.

jayesh

e-mail id : jayesh.mhatre@accconcrete.com

Posted by on

  • Anonymous Feb 26, 2009

    I forgot admin password too, how can I reset this password.

  • TariqSaeed May 03, 2009

    forgot the password which was custom password, not default

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The polycom didn't allow for numbers, only letters.....
How do I do password recovery in this case?

Posted on Mar 30, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Please go to diagnostics scree and try resetting the system. The 14 digit serial number of VSX 7000 camera unit need to be entered for the reset

Posted on Jul 13, 2010

  • ponbala Jun 13, 2014

    You would need to perform factory restore of VSX 7000

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 93 Answers

The password is the same as the serial no!

Posted on Feb 08, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Can anybody help me , I have new polycom VSX 7000 .it did not taking default password like admin and serial number .If any other password .Please reply the same .

Posted on Oct 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset the password of polycom hdx 7000


You can use the hardware restore button on the Polycom HDX system to reset
the system in one of these ways:
• Restoring configuration-Restores the configuration, which resets most
system settings to default values.

• Factory restore-Completely erases the system and restores it to the
software version and default configuration stored in its factory partition.
If you follow this procedure while a USB storage device is connected, the
system restores from the USB device instead of the system's factory
partition.
The restore button is on the front of the Polycom HDX 9000 series system, as
shown in the following figure.

1.png



The restore button is on the front of the Polycom HDX 8000 series, Polycom
HDX 7000 series, and Polycom HDX 4000 systems, as shown in the following
figure.

2.png


The restore button is on the left side of the Polycom HDX 4500 system, behind
a wire mesh screen, as shown in the following figure.


3.png


Use a paperclip to press the restore button through the wire mesh covering
that side of the system. to reset the HDX Series system we can press the restore button over 15 second.

Feb 27, 2014 | Polycom VSX 7000 Video Conference

1 Answer

3 way video conf


Your VSX 6000 does not support Multipoint. YOu will have to move up to the VSX 7000 or 8000. The VSX 7000 supports MP and the VSX 8000 supports 6 site mp if you have that option installed. DAVID

Dec 12, 2012 | Polycom VSX 6000 (220022222001) Video...

1 Answer

Forgot the admin password


you can contact the service provider......

Oct 07, 2011 | Polycom VSX 7000 Video Conference

1 Answer

My VSX 7000S does not recognize the microphone. It is connected to VSX\r\ncamera by the brown RJ11 cable with ferrite end to the camera but no sound is picked up and system status indicates "no...


You need to go into the audio settings via
Admin Settings
Audio Settings
and make sure Enable Polycom Microphone is checked off.
Reboot and see if your microphone is recognized.

Jan 13, 2011 | Polycom VSX7000 Videoconferencing System...

2 Answers

How to reset VSX 8000 to factory default - Forgot the password


RTFM!!!
section 8, page 4

System -> Diagnostics -> Reset system
you will need serial number for this

good luck.

May 03, 2009 | Polycom (VSX 8000/VORTEX EF2280 ) (Bundle)...

1 Answer

Polycom vsx 7000


no the power supply is propreitory( has multiple voltages) & is not advisable, u could blow up ur expensive confeencing equipemt.polycom has designed it in that manner!!

Jan 19, 2009 | Polycom VSX 7000 Video Conference

1 Answer

VGA Output resolution


If it has an IP address connect to it using a computer on your network.

Mar 04, 2008 | Polycom VSX 7000 Video Conference

2 Answers

Factory reset


put a paperclip in the front just below power button and turn unit on. this will factory reset it.

Oct 25, 2007 | Polycom VSX 7000 Video Conference

Not finding what you are looking for?
Polycom VSX 7000 Video Conference Logo

12,645 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polycom Conference Phones Experts

Danny Nagdev

Level 2 Expert

47 Answers

pbxinc

Level 2 Expert

61 Answers

David Burbee
David Burbee

Level 2 Expert

1868 Answers

Are you a Polycom Conference Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...