Question about Televison & Video

Open Question

Motorola Dual Tuner DCT 6412 ----- Need answer ???

Posted by mt_smith01 on Dec 12, 2008 CAWwindy1,

I need a little more info from the 6416's diagnostics menu. With the unit powered on, press the POWER botton on the 6416 (not the remote) then immediatly press the SELECT button. You might have to press select one or two times to get it.

If you don't see DIAGNOSTICS at the top of the page, press the left arrow button on the 6416 once.

From the diagnostics main menu, use the down arrow to get to d04 (inband status) then press the right arrow. Look at Tuner 1 and Tuner 2 and please let me know what it says for Mode.

In d06 (current channel status) you will want to see what it says for Type and Status for both tuner 1 and tuner 2.

When all done, you can just hit the power button again to get out of the diagnostics mode.

Thanks :-)


Comment posted on Dec 12, 2008 d04 Information

In Band Tuner 1
Mode : 256 QAM
Carrier Lock : Yes
PCR Lock : Yes
Data : Yes
Freq : 0717.000 mhz
SNR : 34.7 db - Good
5 sec error count :
Uncorrectable : 000 Correctable : 000

In Band Tuner 2
Mode : 256 QAM
Carrier Lock : No
PCR Lock : No
Data : 0639.000 mhz
SNR : 0 Invalid
5 sec error count :
Uncorrectable : 0 Correctable : 0

d06 Information

Tuner 1 Status : Acquired and Locked
Tuner 2 Staus : N/A



Comment posted on Dec 16, 2008 I have supplied the info you requested (mt_smith01) with regard to diagnostic readings for d04 & do6 but have yet to hear back from you , although I did get an e-mail asking me to rate your answer to my problem . Do you have an answer

Posted by on

  • CAWwindy1 Dec 21, 2008

    In Band Tuner 1
    Mode : 256 QAM
    Carrier Lock : Yes
    PCR Lock : Yes
    Data : Yes
    Freq : 0717.000 mhz
    SNR : 34.7 db - Good
    5 sec error count :
    Uncorrectable : 000 Correctable : 000

    In Band Tuner 2
    Mode : 256 QAM
    Carrier Lock : No
    PCR Lock : No
    Data : 0639.000 mhz
    SNR : 0 Invalid
    5 sec error count :
    Uncorrectable : 0 Correctable : 0

    d06 Information

    Tuner 1 Status : Acquired and Locked
    Tuner 2 Staus : N/A

  • CAWwindy1 Dec 23, 2008

    mt_smith01 ----are you out there ? Have you seen my information above that you requested ? Any ideas ?

×

3 Suggested Answers

  • 3 Answers

SOURCE: i need remote control code number for motorola dvr 6416 III

If this is a remote by UEI or Atlas (usually the black remote that the cable company supplys with the box) the code is 1376.

To set the code, you will need to do the following:

Unlock the Cbl button:
Press CBL once. it will blink once.
Press and hold SETUP until CBL blinks twice. Release setup
Press 982
CBL will blink 4 times, indicating it is unlocked

Program the code in:
Press CBL once. it will blink once.
Press and hold SETUP until CBL blinks twice. Release setup
Press 1376
CBL will blink twice if the code is accepted.

Re-lock the CBL button:
Press CBL once. it will blink once.
Press and hold SETUP until CBL blinks twice. Release setup
Press 982
CBL will blink 2 times, indicating it is locked again

If it is not a UEI or Atlas remote, let me know the remote make and model

Posted on Dec 04, 2008

  • 1 Answer

SOURCE: Motorola Dual Tuner PVR - DCT 6412-III --- HELP

I was just reading another blog on this problem and it seems you must clear any recording setup you have for the program the go to the settings and in the history file delete all listings of it. This can take a while as you must delete them one at a time. Then you can reset the series or single recordings. Seems to work for some people. I am having the same problem and programs are disapearing one at a time. Good Luck
Smalltown

Posted on Mar 08, 2011

MikeL DISH
  • 92 Answers

SOURCE: dish receiver 322 dual tuner will not give

The situation you explained, klipjointhai, is pretty interesting and I would enjoy the opportunity to help! What does show on the screen when you press the Select button on your remote? Also, are you able to make the TV guide come up when you press the Guide button?

Posted on Jul 26, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Motorola dct 6412 wont turn off


pull the power at the back of the box or the wall, which ever is more convient. then wait for all the power to bleed out of the capacitors takes a minute or two (we call this a power cycle) hopefully it comes back up. might be time to put it to pasture.

Oct 10, 2012 | Arris DCT6200 DTV Receiver

1 Answer

I want to hook my pc to my motorola 6412 so i can tv as a monitor


in order to do this you will need to have a pci slot available on your motherboard and purchase a video capture card also known as a tv-tuner card, these cost approximately $50 but you could get one cheaper used (which i recommend), you can then configure the device using windows media center. In addition, in order to connect your PC to your television you will need a graphics card that is capable of providing this functionality.

Oct 29, 2009 | Motorola Televison & Video

1 Answer

Denon AVR-4306 + Motorola DCT-6416 Blanking


Hi Jim,
I tried connecting my dvr via component and optical to see if it was my hdmi or my dvr. Ended up being a bad hdmi plug in back of my amp. I was fortunate enough to have both style connections on my dvr. Hope this helps

Turk

Oct 13, 2009 | Denon AVR-4306 Receiver

1 Answer

Motorola Dual Tuner PVR - DCT 6412-III --- HELP


I was just reading another blog on this problem and it seems you must clear any recording setup you have for the program the go to the settings and in the history file delete all listings of it. This can take a while as you must delete them one at a time. Then you can reset the series or single recordings. Seems to work for some people. I am having the same problem and programs are disapearing one at a time. Good Luck
Smalltown

Feb 24, 2009 | Arris DCT6200 DTV Receiver

1 Answer

I have a Motorola High Definition Digital Receiver DCT6200 and the red record icon is not visible


The DCT6200 is not a recorder. You need a 6416 or 6412 model for DVR function.

Jan 08, 2009 | Arris DCT6200 DTV Receiver

1 Answer

Samsung TV Mode not supported message


check to see if the output is set to 480i. HDMI does not support 480i - http://samsungplasmatvfaq.com/index.php/Display_settings

Oct 08, 2007 | Samsung LN-S2651D 26 in. LCD Television

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

425 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69878 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6445 Answers

yadayada
yadayada

Level 3 Expert

64052 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...