Question about HP Compaq Presario V2000 Notebook

1 Answer

MY LAPTOP(hp compaq presario v2000)BEEPS TWICE AND DISPLAYS PRESS F1 TO RESUME OR F2 TO SETUP!pls help it beeps twice and demand to press f1 to resume or f10 to setup. the problem is that the keyboard doesn't repond, it looks like keyboard is off. (almost everything is off I tried external keyboard through usb but no response niether)

Posted by on

  • 1 more comment 
  • aliissay Dec 20, 2008

    I did, and it didn't help.

  • wvuraven Jan 04, 2009

    I have the same problem with the same exact computer. My issue started on Dec 30th. I replaced the battery on the Motherboard, tried using an external keyboard and still no resolve. Any other solutions? If not, would it just be easier to buy a new laptop?

  • Sunny Akande
    Sunny Akande Apr 22, 2009

    MY LAPTOP(hp compaq presario v2000)BEEPS TWICE AND DISPLAYS PRESS F1 TO
    RESUME OR F2 TO SETUP!pls help
    it beeps twice and demand to press f1 to resume or f10 to setup. the
    problem is that the keyboard doesn't repond, it looks like keyboard is
    off. (almost everything is off I tried external keyboard through usb
    but no response niether)

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,110 Answers

Try to reset BIOS by remove CMOS battery from motherboard and re insert again...

Posted on Dec 17, 2008

  • Sibananda Jena
    Sibananda Jena Dec 20, 2008

    There might be some problem with ur motherboard..u have to replace it...

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When i switch on my compaq presario V2000 laptop it beeps three times and then freezes giving me the option to press f1 or f10 but when i press f1 or f10 it still doesn't work and is still frozen


Hi....
Actually beep sound indicates hardware error or BIOS error.
Don't press F10 while starting.
Let your laptop to start wait for 10min....
If it will not starts..........
Press F1(BIOS Settings for some pc F2 is Bois Setting)

If it will load BIOS.......... then your BIOS is OK


Then you need to change hard disk...


If not you need to change BIOS hardware(IF you i will tell you the way restore BIOS but it's very difficult task.It needs a trained person.)

Thank you have a nice day............

Feb 06, 2011 | HP Compaq Presario V2000 Notebook

1 Answer

HP Pavilion ze2308wm laptop won't boot up


It could be the memory modules (RAM). Get the information from those RAM sticks (manufacturer) and replace them with new ones to see if that solves the issue, if not then maybe the hard drive, and if it's neither of those, I hate to say it, but it sounds like a bad motherboard :(

Mar 14, 2010 | HP Pavilion ze2000 Notebook

1 Answer

HP Pavilion ze2308wm won't boot up


Have you tried an external keyboard, either PS2 or USB depending on what ports are available?

Mar 14, 2010 | HP Pavilion ze2000 Notebook

1 Answer

Compaq V2000 "Press <F1> to resume, <F10> to Setup


re install the operating system.insert the recovery disk and follow the instructions.

Feb 20, 2010 | HP Compaq Presario V2000 Notebook

1 Answer

My Compaq V2000 beeps twice & freezes


It sounds like the RAM is either not compatable or is bad. Put the old RAM back in and try again. Also the V2000 and HP DV2000 is in recall for mother board problems.

Nov 12, 2009 | HP Compaq Presario V2000 Notebook

1 Answer

MY LAPTOP(hp compaq presario v2000)BEEPS


hi roman razumo,

these are common infos you can see on beep codes.

if you have AMI, your computer has memory problems. First check video. If video is working, you'll see an error message. If not, you have a parity error in your first 64K of memory. First check your SIMM's. Reseat them and reboot. If this doesn't do it, the memory chips may be bad. You can try switching the first and second banks memory chips. First banks are the memory banks that your CPU finds its first 64K of base memory in. You'll need to consult your manual to see which bank is first. If all your memory tests good, you probably need to buy another motherboard. (more info on this click here)

for physical troubleshooting tips for laptop issues, please click this link.

http://www.laptoprepair101.com/

hope this helps.

regards,

voodoo

Apr 12, 2009 | Computers & Internet

2 Answers

MY LAPTOP(hp compaq presario v2000)BEEPS TWICE AND DISPLAYS PRESS F1 TO RESUME OR F2 TO SETUP!pls help


Hi, and welcome to FixYa
The computer may display a prompt to press F1/F2 or any other key to enter setup each time the computer boots as a reminder on how to enter CMOS. However, if the computer asks to press F1/F2 (or another key) to enter setup and does not continue, this issue can be caused by any of the below possibilities.
1. New hardware has been recently installed.
2. Error or confliction with settings in CMOS.
3. CMOS battery is bad or failing.
Solution:
New hardware has been recently installed
If new hardware has been recently installed into the computer, it is likely that you are receiving the prompt "Press F1 or F2 to enter setup" because CMOS needs to verify that the new detected hardware is properly being setup in CMOS.

Error or confliction with settings in CMOS
If no new hardware has been added to the computer or the new hardware has been removed and you continue to receive the error, it is likely that there is an error or confliction with the CMOS. Press the key requested to enter setup and verify that all settings are correct. If everything appears to be correct try resetting the CMOS values to the defaults and/or Reset Configuration Data. Additional information about how to do this can be found on document CH000976.
If all settings appear to be correct, save changes and exit CMOS setup. If the error continues to appear, enter setup again and restore all CMOS values to default.
· See our CMOS page for additional help and information with the CMOS.
· Additional information about getting into the CMOS / BIOS setup can be found on document CH000192.
CMOS battery is bad or failing
If you continue to receive the prompt to enter setup each time the computer boots up and you have attempted to follow the above suggestions, it is also possible that the CMOS battery may be bad or failing. Generally; when this occurs, the computer is not holding the time or date correctly. If this is occurring it is recommended that the CMOS battery be replaced.

regards
/Teis the Wiz - -> Vote "FixYa" :-)

Dec 05, 2008 | Computers & Internet

1 Answer

When i turn the laptop on it won't go pass the f1 to resume f10 to restart


Computer BIOS information and help If the computer does not pass the POST, you will receive a combination of beeps indicating ... CH000301, Prompt to press F1/F2 each time computer boots.


Linux and UNIX cut command help Lines with no field delimiters will be passed through intact .

Good Luck please dont for get to Vote/Thank You.

Dec 20, 2007 | HP Compaq Presario V2000 Notebook

8 Answers

Compaq Presario V2000 boot up problem


i have the same problem with mine, the compaq2_bing.gif screen shows and beeps twice and then it says press f1 or f10 but it doesnt respond to anything i press

Nov 24, 2007 | HP Compaq Presario V2000 Notebook

Not finding what you are looking for?
HP Compaq Presario V2000 Notebook Logo

1,164 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18375 Answers

Tony

Level 3 Expert

2598 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...