Question about Lexmark X1290 All-in-one Inkjet Print Printer

1 Answer

No communication , all plugs are in - Lexmark X1290 All-in-one Inkjet Print Printer

Posted by on

  • kimbleby Jan 07, 2009

    My printer is all plugged in, driver installed and still no communication?  I'm not a technical person so don't wanna mess about with it without some guidance.  Thanks.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 102 Answers

With the Lexmark printers communication subsystem you MUST let the driver ask for you to plug in the printer. DO NOT plug the printer into the USB port until told to do so.

To fix a fouled install:
(1) Uninstall the Lexmark drivers in Add Remove Programs
(2) Shutdown the computer
(3) Disconnect the printer from the USB port
(4) Restart the computer
(5) Run the Driver Installation software
(6) Cancel ALL attempts by windows to auto install the printer
(7) When the software asks for the printer connect it and continue

Posted on Feb 05, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ISO9141 GMC ENVOY '08


Where are you coming up with this ?
ISO 9141 and KWP 2000 this is a communication protacoll. when the scan tool is plug into the OBD port it uses a set amount of communication dialog to communicate with the ECM, Majority of time when a scan tool can not communicate with the vehicles ECM ,

Apr 08, 2017 | 2008 GMC Envoy

1 Answer

Garmin nuvi 1450 problems


You need to download a Garmin tool called "Garmin Express" to load the map software off the Garmin site.

May 19, 2017 | GPS

1 Answer

Communication link


code readers need the correct pins to communicate to the ECM . You will have to say what the car is and what engine as there are a number of cables that can be connected .

Jan 04, 2014 | 2007 Hyundai Sonata Limited Sedan

2 Answers

Have a contractor with a AWS18THX & AOS181HX In his own house & 1 year after installed the contractor is shut down. He is showing a code F1 (communications?) How can I get a manual for this? Thanks...


Mark,
Your problem lies with the communication wire from the outdoor unit to indoor unit ("S" terminal). Make sure the connections are tight and all plugs at the outdoor unit are plugged in. Also the communication wire should be 14 awg. If it too small, errors could result. Worse case send the Aquaman there.

Apr 04, 2011 | Heating & Cooling

1 Answer

It says " The wizard was unable to communicate


it could be that one port is bad try pluging it in different port.

Jan 25, 2011 | Dell 968w Printer

2 Answers

The printer will not communicate with my computer


With the Lexmark printers communication subsystem you MUST let the driver ask for you to plug in the printer. DO NOT plug the printer into the USB port until told to do so.

To fix a fouled install:
(1) Uninstall the Lexmark drivers in Add Remove Programs
(2) Shutdown the computer
(3) Disconnect the printer from the USB port
(4) Restart the computer
(5) Run the Driver Installation software
(6) Cancel ALL attempts by windows to auto install the printer
(7) When the software asks for the printer connect it and continue

Feb 06, 2009 | Lexmark X5470 All-In-One InkJet Printer

1 Answer

Communication problem printer lexmark2600


With the Lexmark printers communication subsystem you MUST let the driver ask for you to plug in the printer. DO NOT plug the printer into the USB port until told to do so.

To fix a fouled install:
(1) Uninstall the Lexmark drivers in Add Remove Programs
(2) Shutdown the computer
(3) Disconnect the printer from the USB port
(4) Restart the computer
(5) Run the Driver Installation software
(6) Cancel ALL attempts by windows to auto install the printer
(7) When the software asks for the printer connect it and continue

Jan 12, 2009 | Lexmark X4530 InkJet Printer

1 Answer

Lexmark 1240...


With the Lexmark printers communication subsystem you MUST let the driver ask for you to plug in the printer. DO NOT plug the printer into the USB port until told to do so.

To fix a fouled install:
(1) Uninstall the Lexmark drivers in Add Remove Programs
(2) Shutdown the computer
(3) Disconnect the printer from the USB port
(4) Restart the computer
(5) Run the Driver Installation software
(6) Cancel ALL attempts by windows to auto install the printer
(7) When the software asks for the printer connect it and continue

Aug 10, 2008 | Lexmark Optra Color 1200 Led Printer

Not finding what you are looking for?
Lexmark X1290 All-in-one Inkjet Print Printer Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Don  Farrell
Don Farrell

Level 3 Expert

1018 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18408 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...