Question about Canon MultiPASS MP730 All-In-One InkJet Printer

1 Answer

Canon mp730 Error message

I can get into the service menu but as I scroll through I do not see "counter"
My options are #1 SSSW #2Menu, #3Numeric parm, #4 NCV, #5Type, #6 Genesis (UHQ), #7 printer, #8 Clear, #9 ROM, #10 CS set, #11 Service Report, Test Mode then back to 1.

When I went into clear and eventually got to clear all I did that, but am still getting the error message "Waste ink near full",

Can you be a little more specific so that I can get to the counter, but I think that only reset's the counter, what do I do about the "Waste ink being near full, and what happens when it is full. Resetting the counter is only a small part of the problem. I need to know what parts I will need to replace if any, where to procure them, and instructions on how to put them in.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 351 Answers

Dear sir,
physically you can't replace that part ,its a EPROM counter, which shows you the error message .you can only reset the counter through that procedure.otherwise if you want to replace that part then you have to contact authorised Service centre , to replace that part.

Regards

Posted on Dec 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Message reads: wrong cartridge but I have put in 2 new canon cartridges and the message won't go away...getting really aggrevated!!!


To reset waste tank full error in MP730.

1. Hit the "menu": Key
2. Hit "Copy" Key
3. Hit "#" Key
4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading
5. Hit the "3" button- this will bring up Eprom Clear
6. Hit "0" button
7. Hit the "Stop" button

Mar 05, 2011 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

"wrong cartridge" message appears, new


It could be due to "waste tank full" alarm; you may need to reset the waste tank counter.
I found a reset sequence for a MP730 printer in this website that works for F30 and F50 as well. Try:
Resetting the Waste Ink Volume Counter

1) Enter SERVICE MODE.---
By pressing Menu-Copy-#

2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

Skip step (6) since there is no [OK] key on F30 or F50 printers.

Feb 24, 2011 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

Waste ink tank full almost full on the canon mp730


These reset procedure will clear the error 343 or waste ink tank full.

1. Press the Menu key
2. Press the Copy key
3. Press the " # " key
4. Sroll from the menu option until you come to " counter ", then press OK.
5. Press Menu and select "clear all"
6. When the message "please wait" appear, press the Menu two times.
7. Restart the printer.

Let me know if this one solve your problem.
Please comeback and do rate this solution.
Thanks for using Fixya.

Aug 25, 2010 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

How do I change the waste ink absorber in a canon ink jet printer


Hi you can try this.

To reset waste tank full error in MP730.

1. Hit the "menu": Key
2. Hit "Copy" Key
3. Hit "#" Key
4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading
5. Hit the "3" button- this will bring up Eprom Clear
6. Hit "0" button
7. Hit the "Stop" button


Can only try then your printer go on longer but some time the other you need to clean out the waste ink it inside the printer go to open up all.



Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.

All The Best: Pineworks

Dec 28, 2009 | Canon MultiPASS MP730 All-In-One InkJet...

2 Answers

A message saying waste tank nearly full comes up and i need directions to fix it?


Hello. this message indicates that the computer merely has to be reset [canon is hoping you will take your printer to them for a costly tuneup] here are the steps to reset your counter:

Manual Reset procedure for waste ink tank full error in Canon Smartbase MP730 printers:
  • Hit the “menu”: Key
  • Hit “Copy” Key
  • Hit “#” Key
  • Scroll thru the menu headings until you come to “Test Mode” - 12th heading
  • Hit the “3′ button- this will bring up Eeprom Clear
  • Hit “0′ button
  • Hit the “Stop” button

Here is a link where you can download the entire service manual for $4.00. http://www.tradebit.com/filedetail.php/4546475-canon-smartbase-mp360-mp370-mp-360-370

Oct 13, 2009 | Canon SmartBase MP360 All-In-One InkJet...

1 Answer

My Canon Pixima mp760 printer has the ink abosrber almost full. Can you explain in plain english step by step how to reset the counter to 0. Thanking you. Sharon Fitzgerald


This is for MP730, maybe it's similar Good luck
Manual Reset procedure for waste ink tank full error in Canon Smartbase MP730 printers:
  • Hit the “menu”: Key
  • Hit “Copy” Key
  • Hit “#” Key
  • Scroll thru the menu headings until you come to “Test Mode” - 12th heading
  • Hit the “3′ button- this will bring up Eeprom Clear
  • Hit “0′ button
  • Hit the “Stop” button

Jun 01, 2009 | Canon PIXMA MP760 All-In-One InkJet...

1 Answer

Waste ink warning


you press menu, copy, #
you will enter service mode.
then go over to TEST mode press set.
press 8, then 3, then 0.
Ink counter will be reset.
Then press the on/off button and it will go back to normal.
Hit Menu, Copy, #.
Go to #8 Clear, then you can access with the plus and minus buttons all functions you can clear.

Aug 21, 2008 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

Waste tank near full


Hi you can try this.

To reset waste tank full error in MP730.

1. Hit the "menu": Key
2. Hit "Copy" Key
3. Hit "#" Key
4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading
5. Hit the "3" button- this will bring up Eprom Clear
6. Hit "0" button
7. Hit the "Stop" button


Can only try then your printer go on longer but some time the other you need to clean out the waste ink it inside the printer go to open up all.



Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.

All The Best: Pineworks

Jun 10, 2008 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

Stupid Canon MP730 waste ink nearly full message


Hello please try this

To reset waste tank full error in MP730.

1. Hit the "menu": Key
2. Hit "Copy" Key
3. Hit "#" Key
4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading
5. Hit the "3" button- this will bring up Eprom Clear
6. Hit "0" button
7. Hit the "Stop" button


Can only try then your printer go on longer but some time the other you need to clean out the waste ink it inside the printer go to open up all.



Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.

All The Best: Pineworks

May 26, 2008 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

CANON MP730 ERROR MESSAGE 343 WASTE INK FULL


1-press the "menu" key
2-press the"copy" key
3-press the"#" key
scroll thru the menu heading until you come to "counter"
press "ok"
press "menu"
and select "clear all" it will ask you to "please wait"
then press menu two times
restart your printer
it will work

Feb 22, 2008 | Canon MultiPASS MP730 All-In-One InkJet...

Not finding what you are looking for?
Canon MultiPASS MP730 All-In-One InkJet Printer Logo

251 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1814 Answers

Corne Viljoen

Level 2 Expert

385 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...