Question about Polaroid FLM-3232 Television

1 Answer

Polaroid FLM-3232 Just went black had burnig smell

LCD tv only about 2 years old ,do they have bulb to change or more serious problem .Is it worth getting someone to look at or get a new one.Thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 21 Answers

LCD sets are backlit by a special color temperature fluorescent lamp assembly, usually built into the display itself and not replacable for most brands. There are no "light bulbs" to replace in flat panel units.

The failure you described is a serious one. A burning smell often means the main power supply or display buffer drives shorted somewhere. The display or lamp could also be shorted out (rare) , but you might find a damaged backlight power supply (not rare).

Just changing the affected board (s) may not be your only problem, as there could be shorts elsewhere that caused the failure to begin with. Proper power precautions are needed from blowing the new board the second you fire the set up.

Only thing I could recommend is find a FACTORY AUTHORIZED repair center and find out what's wrong. They would have quick access to parts and resources for engineering support directly from the manufacturer. It's best to find one with a reasonable estimate charge and make sure that charge is credited to your final bill should you decide to have it repaired.

Mark

Posted on Dec 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I was playing a game on my polaroid tv and the screen went black on me. How do I fix it?


Sounds like The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Jan 10, 2017 | Polaroid Televison & Video

1 Answer

Polaroid FLM 323b flickers. How to make this stop


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electro-medical.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board . In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Jan 08, 2017 | Polaroid Televison & Video

2 Answers

How do i fix black spots on my LG plasma tv. model 50pj350ub


If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Line faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size.
Search the site by type in the "BRAND NAME" of your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts

Jan 08, 2017 | LG 50PJ350 50 HDTVReady Plasma TV

1 Answer

I have pioneer plasma tv about 6 years old. I turned the power on, sound but no picture. Do you think it is worth fixing?


no
plasma tv units consume considerable power and the latest led units don't so for the extra cost of a new unit , there will be a power saving over the years

Jan 08, 2017 | Pioneer Televison & Video

1 Answer

I have an old Hitachi wall mounted TV with a diagonal locking bar. How do you release the locking bar?


If you wish to get more details, visit the site linked below. Screen faults of both Plasma and LCD screen are given with details and illustrations. http://electronicshelponline.blogspot..com/

Jan 07, 2017 | Hitachi Televison & Video

1 Answer

Do a 2001 GE projection tv have a lamp in it?


Yes course there is a lamp . You can order one from ebay for around $10 .

Apr 21, 2014 | Televison & Video

33 Answers

TV just flashes different colors


You have entered a diagnostic colour test. With the TV powered on, hold the 'Menu' & 'Enter' together, then press the power button. Problem resolved

Jun 25, 2006 | ViewSonic N2750w 27 in. HD-Ready LCD...

Not finding what you are looking for?
Polaroid FLM-3232 Television Logo

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Televison & Video Experts

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

The Knight
The Knight

Level 3 Expert

71736 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Are you a Polaroid Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...