Can I use Plustek optic pro u12 scanner with windows 7

Please find below the link for Downloading the drivers:
http://plustek.com/usa/support/drivers-and-downloads.html
Good Luck!!!!

This is an old scanner, no Win7 driver has been made for it by Plustek. You will have to buy a new scanner or install XP Mode in Win7 and load the scanner in it.

Hi,

Improve the FixYa.com experience for everyone by voting!


The following link shows the compatibility chart your scanner: Plustek Compatibility Chart

The data set forth below is copied from that chart:

OpticPro ST Series Compatible with Windows 7
OpticPro ST28 OpticPro ST48 OpticPro ST64+ OpticPro S Series

All the best

Ben

Go to the link below for your drivers

http://plustek.com/usa/support/drivers-and-downloads.html

http://softwaredownloadmirror.com/freeware/plustek-scanner-drivers-na/639579/

If you need further help, reach me via phone at https://www.6ya.com/expert/joel_63c670a84e9f6a97

Yes you can. Drivers are on the Plustek Site, message back if you need an installation procedure.
http://plustek.com/support/download.asp
Look down on the list and a 'MAC' option is available under 'Operating System'. I haven't attempted to run one myself as yet although had to look for the answer when looking for an A3 Scanner to buy for a Mac Suite.

Found a link for a a windows Xp driver, assuming you're using Xp. This driver might work with Windows 7 if installed in compatibility mode.

http://members.driverguide.com/driver/detail.php?driverid=49123

Hope this helps :)

Here is a link to all your software. Good Luck.

http://www.plustek.com/usa/support/download-result.asp

i have old plustek opticpro U12 Scanner software,
rigister s/n:52D11F002984

Puedes encontrar el controlador para el scanner aqui, pero solo funciona con Windows 95 / 98 / ME / NT / 2000, aunque puedes intentar instalar en Windows XP.