Question about Hoover AL120 Front Load Washer

1 Answer

Hoover AA1200 Front Loader Washing Machine.

Push button control panel has come loose and dropped iside the washer's cabinet. How do I take the panel off to recover it?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Leverage with a screwdriver and it clicked off. Thanks anyway

Posted on Dec 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool aa1200


Go on line to whirlpool.com/au and you should be able to download a operation manual.

Nov 13, 2013 | Hoover AL120 Front Load Washer

1 Answer

Washing machine say control locked. What does that mean?


If you are referring to the Control Lock on a Whirlpool Duet, Kenmore Elite, or Maytag Epic series front loader, this is built-in a safety feature that enables the consumer to lock the control panel to prevent children from manipulating the controls and accidentally starting the appliance.

With the lock on, the control panel is disabled and you cannot use any of the controls, except the button to unlock it. It can inadvertently be set following a power outage, leaning against the control panel, or pressing and holding the wrong button. This is usually not an indication of a malfunction.

The following link explains how to lock/unlock this feature:

http://www.fixya.com/support/r3608801-control_panel_lock


These instructions are also printed on the front panel of the appliance and in the owner's manual.

If this does not correct your problem, then you may have a more significant problem other than a simple operator control button issue (such as an operator console problem or main control board issue).
NOTE: Each one of these washers come with a technical data sheet inside.

To access, you will need to remove the lower toe panel under the door. The access screws are located under the bottom front edge of the panel. You may have to prop the two front feet of the washer up for better access ( a 2x4 works well for this). With the screws removed, the panel should drop down, then come off. If the tech sheet isn't directly behind the panel, it will be affixed to one of the interior cabinet walls.

The tech sheet lists all error code definitions, troubleshooting data, diagnostics procedures and wiring diagrams. I mention the tech sheet because you may need it to troubleshoot if you cannot get the control panel to unlock.

Read through the information provided and if you have questions, please post back and let me know. I hope you find this information helpful.

Apr 27, 2011 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Just moved our washer across country. Now the washing machine is bouncing all over the room during spin cycle. The machine is level. Does it have weights inside that can be adjusted?


yes and no, yes has weights, no can not be adjusted. inspecth the washer for any bent-dents in cabinet and under machine, legs etc. check floor for uneven tiles. last, is possible that internal damage has occurs during transport or a spring came loose in transit. to verify that you have to open iside and inspect.

good luck to you.

Feb 08, 2011 | Frigidaire GLTF2940ES Front Load Washer

1 Answer

How do I unlock the controls on my whirlpool duet washing machine?


If you are referring to the Control Lock on a Whirlpool Duet, Kenmore Elite, or Maytag Epic series front loader, this is actually a safety feature that enables the consumer to lock the control panel to prevent children from manipulating the controls and accidentally starting the appliance.

With the lock on, the control panel is disabled and you cannot use any of the controls, except the button to unlock it. It can inadvertently be set following a power outage, leaning against the control panel, or pressing and holding the wrong button. This is usually not an indication of a malfunction.

The following link explains how to lock/unlock this feature:

http://www.fixya.com/support/r3608801-control_panel_lock


These instructions are also printed on the front panel of the appliance and in the owner's manual.

If this does not correct your problem, then you may have a more significant problem other than a simple operator control button issue (such as an operator console problem or main control board issue).
NOTE: Each one of these washers come with a technical data sheet inside.

To access, you will need to remove the lower toe panel under the door. The access screws are located under the bottom front edge of the panel. You may have to prop the two front feet of the washer up for better access ( a 2x4 works well for this). With the screws removed, the panel should drop down, then come off. If the tech sheet isn't directly behind the panel, it will be affixed to one of the interior cabinet walls.

The tech sheet lists all error code definitions, troubleshooting data, diagnostics procedures and wiring diagrams. I mention the tech sheet because you may need it to troubleshoot if you cannot get the control panel to unlock.

Read through the information provided and if you have questions, please post back and let me know. I hope you find this information helpful.

Oct 18, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Kenmore 26942503 washing machine cycle dial too loose


First, see the Sears parts site for your washer:

http://www.searspartsdirect.com/partsdirect/getModel!retrieve.pd?modelNumber=110.26942503+

See the section on the control panel.

There are clips under the control panel that will pop loose is you use a thin putty knife to push on them from the front. Then the control panel should swing up.


Oct 12, 2009 | Kenmore Washing Machines

1 Answer

Removing front panel from kenmore elite HE-3 front load washer?


If you've removed the screws and the panel sticks, tapping on each side will knock it loose. The panel should drop down, then off. You can also try propping the two front feet of the washer up slightly for better access. A 2x4 works real well. This will allow more room for the panel to drop and gives better access to the screws. The washer is very heavy, so you may need some assistance to lift the front. Either lift from the bottom, or place your hands on the front facing of the cabinet to push the washer back. DO NOT push on the door or control panel.

If you still need assistance, please let me know. I hope this helps you.

Jul 05, 2009 | Kenmore Elite 45986 Front Load Washer

2 Answers

My hoover washing machine 1400 spin 8kg hd vision hd


Hi On my washer when I press the start button when allready in opperation all the lkights flash and it stops as this second press of the button pauses the machine and need the start button to be pressed again to restart the machine
Hope that is cleas and helps
Angela

Jun 22, 2008 | Hoover H130E Front Load Washer

2 Answers

Unlock the control panel to a kenmore elite front loader


to unlock the controls
select and hold drain/spin for 3 seconds until the control locked status lights turn off.

Nov 22, 2007 | Kenmore 3.8 cu. ft. HE3t Front Load Washer

Not finding what you are looking for?
Hoover AL120 Front Load Washer Logo

Related Topics:

336 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Chris Hall
Chris Hall

Level 3 Expert

842 Answers

Are you a Hoover Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...