Question about Hotpoint Ultima WF840 Front Load Washer / Dryer

1 Answer

Test on display cant use washer

I have an hotpoint ulima wt965 and it is stuck on tset and i can not use washing machine at all
it runs through the test cycle and then does the same when i switch it back on again
is there any solutions to get this off without calling out a mechanic?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 100 Answers

Turn the machine on while you press the start and on buttons at the same time until dOFF appears.

Posted on Feb 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Leaking hotpoint ultima washing machine


Hotpoint ultima wt965 washing machine This video will show you how to find that leak on any front loading washing machine
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.
And don't forget to like us on facebook

Jul 16, 2012 | Hotpoint Washing Machines

1 Answer

I have a hotpoint ultima washing machine wt965 and the display is flashing f-05


F05 - Pressure switch jammed on full - Check pump for blackages. Also resetting the machine sometimes solves the problem switch off at plug for 5 mins then switch back on and try again. hop this helped

Sep 26, 2010 | Hotpoint Ultima WF865 Front Load Washer

1 Answer

My hotpoint WT965 displays F02 error and wont spin?


“F02” is a Long Drain error. If the drain time exceeds 8 minutes this error code will be displayed. In addition, a “SUDS” error may also be generated as a secondary error. This is an indication of a drain pump problem and/or clog in the drain line. You will need to check the following:
1. Check the drain hose to make sure it is not kinked or clogged.
2. Check the electrical connections to the pump and ensure the pump is running.
3. Remove the drain pump filter and check for foreign objects and/or debris.

Mar 29, 2010 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Washing machine stuck in test mode hotpoint wf865


To get out of it you need to press start, the display should go daft. Press start again and the display should settle down. Now press the on/off button and the start button at the same time and hold them down for a few seconds until the display shows d-end or d-off.
Your machine should now work. hope this helps.

Nov 22, 2009 | Hotpoint Ultima WF865 Front Load Washer

1 Answer

Hotpoint 1600 wt965 washing machine it has f-18 error message


Not good news - need to book an engineer, F18 is
Communication error the main module could be at fault (PCB)
This is located byhind the switches under the top, don't attempt to have a look though

Oct 25, 2009 | Washing Machines

1 Answer

Hotpoint ulima wt721


Error code F02 means the motor has jammed, and or the tacho is loose or broken.
You will find the tacho on the opp end of the motor to the pulley..
Check to see if it is loose or broken, if it is loose, just push it back in to position.
Plz rate my solution,
Thanks.

Jan 21, 2009 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Washing machine won't spin


Do you hear the motor spinning loud whirring noise,when drum is not,if so drum belt has come off or snapped,if no noise possible brushes on motor need replacing

Jan 18, 2009 | Hotpoint Ultima WD72 Front Load...

2 Answers

Hotpoint WT965 ultima fault code F05


I have a ultima WMD940 won't drain and comes up code F05. Please can you help my washing is piling up

Aug 27, 2008 | Washing Machines

2 Answers

Hotpoint Ultima WT965


Hotpoint Ultima WD72 Front Load Washer/Dryer
This video will show you how to keep your soap draw clear and how to service the parts.
Please remember to subscribe to our YouTube channel for all appliance tutorials

a 4 THUMBS rating is appreciated for answering your FREE question..

Jul 08, 2008 | Hotpoint Ultima WD72 Front Load...

Not finding what you are looking for?
Hotpoint Ultima WF840 Front Load Washer / Dryer Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

hungoverrr

Level 1 Expert

5 Answers

Todd Arndt
Todd Arndt

Level 3 Expert

2044 Answers

puggy666

Level 1 Expert

47 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...