Question about Canon PowerShot SD750 / IXUS 75 Digital Camera
First ensure that this is not a setting problem, by removing batteries to reset camera. try also using the Reset command in the camera menu , after removing batteries.
if you can see old pictures, but new ones come out black, that means that for some reason, no light is coming to the array sensor (the sensor that scans and take the picture), or the signal is not arriving to main board, or the board is faulty.
Check first that the shutter is opening properly, that lens is extending, and that there is no dirt on top of the objective lens.
If that is not a problem, then there is either a defective array sensor, a losen array sensor cable/connector, or the main pcb inside the camera has a fault.
In all cases the camera must be taken apart, inspected, and fixed by a technician.
Posted on Dec 17, 2008
Tips for a great answer:
Jun 07, 2011 | Pentax Digital Cameras
Jun 07, 2011 | Polaroid i1237 Digital Camera
Dec 21, 2010 | Kodak EasyShare C330 Digital Camera
Oct 02, 2009 | Canon PowerShot A85 Digital Camera
Aug 11, 2009 | Canon PowerShot A60 Digital Camera
Jun 19, 2009 | Canon PowerShot SD1000 Digital Camera
Dec 15, 2008 | Kodak EasyShare LS443 Digital Camera
Aug 31, 2008 | Kodak EasyShare C315 Digital Camera
Jan 14, 2008 | Kodak EasyShare CX7330 Digital Camera
86 people viewed this question
Usually answered in minutes!