Question about HP Photosmart 4180 All-in-One Printer

1 Answer

HP C4180 orange light

My all -in-one is now displaying a steady orange light, instead of a green light power. I have unplugged in, and tried holding buttons...no help. My wife uses it for college..please help. I have also tried re-starting computer.

Posted by on

  • 1 more comment 
  • risingking Dec 17, 2008

    so what do I need to do?

  • risingking Dec 17, 2008

    replace cartridges...no help ...NEXT?

  • risingking Dec 18, 2008

    I have a brand new, original cartridge...I also replaced this new one with another new one. The light still is steady orange....no help

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 112 Answers

Your cartage is now damage relapse it your problem will be solved

Posted on Dec 17, 2008

  • MOHSIN AMIN
    MOHSIN AMIN Dec 17, 2008

    replace cartridges
    are put out cartridgesand clean it be carefully and put in again maybe its works if not
    then replace cartridges
    but be a use genuine part of any product

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix a 59.C0 error on my printer?


  1. Turn the printer off, and then turn the printer on.
  2. If the error message returns, turn the printer off.
  3. Perform a cold reset.
    1. Turn the printer on.
    2. Watch the control panel.
    3. When the memory starts counting, press and hold the green (Select) button.
    4. Continue holding the green (Select) button until the Ready, Data, and Attention lights flash once, and then stay on steady.
    5. Release the check button when the Ready, Data, and Attention light are on steady. The control panel will display SELECT LANGUAGE.
    6. Press (Down Arrow) button once. The control panel will display COLD RESET.
    7. Press (Select). The printer will perform a cold reset and then continue its power-on sequence. NOTE: If this message persists, you will need to contact an HP-authorized support provider.

Sep 15, 2015 | HP Color LaserJet CM2320nf MFP Refurbished

1 Answer

My hp laserjet 1300 printer shows blinking the orange light instead of the green one and I couldn't find out what is the reason


1. Go light/button blinks twice with solid green and orange lights
2. Green light starts blinking with go light twice and then both go off
3. orange light goes off.
4. green light followed by orange light followed by go light cycle twice and a third time by the green light
5.followed by the orange light continuously blinking.

I have already tried the following trouble-shooting:

1. Put in a new cartridge
2. Made sure there is paper properly seated in the tray
3. Made sure all doors closed (I even took off left side to verify no memory cards
4. Verified all doors closed
5. Done a cold reboot by holding the Go button while turning the unit on.
6. Repeated steps 1-5 multiple times.Hope It's resolve all Your Printer Problem,
Or

Still having Problem Then follow Us For HP Support

Mar 06, 2014 | HP LaserJet 1300 Printer

1 Answer

Orange light trying charge


I would try this:
take the battery out
unplug the charger
turn upside down
hold power button down for 1 min
keep holding power button down as you turn over the laptop
while still holding power button down plug in charger and try to power on

Jan 26, 2014 | HP Computers & Internet

1 Answer

My hp laserjet 1020 plus printer blinking both. when a click print, the orange and green light started bliking instead of printing and no printing


Hi.

I will suggest you try reset the printer, follow the instruction below to reset your printer,

1. Without turning the unit off, unplug the power cord from the back of the product.
2. Press and hold # and 6 keys.
3. While holding those keys plug the power cord back in.
4. Wait until the screen goes blank before you release those keys.
5. Follow on printer screen instructions.

If that did not fix the problem, try this,
  1. Unplug the power cable from printer while the printer is powered on.
  2. Press and hold OK and HELP buttons while plugging in the power cord. Wait for the screen to go black or blank before releasing the keys.
  3. Just turn on the printer and configure your printer new.

May 08, 2011 | HP LaserJet 1020 Printer

1 Answer

What is the cause of a 51.2M error on a HPLJ4600 color printer


Hello
According to HP following is the remedy for this error
  1. Turn the printer off, and turn it on again.
  2. Remove the surge protector or Uninterruptible Power Supply (UPS) and connect the printer directly to a power source.
  3. Try a different power cord.
  4. Try a different electrical circuit or outlet.
  5. Inspect the fuser for media or damage, and reseat the fuser.
    1. Open the top cover.
    2. Locate the green square tab on the right of the fuser flap and lift it to inspect the fuser roller for media or damage.
    3. Unscrew two blue knobs located on each side above the control panel.
    4. Lift the fuser by grasping the fuser housing above the green arrow on the left and right.
    5. Reinstall the fuser.
  6. Perform a cold reset on the printer.
    1. Turn on the printer.
    2. Watch the control panel.
    3. When the memory starts counting, press and hold the green c00224695.jpg (Select) button.
    4. Continue holding the green check button until the Ready, Data, and Attention lights flash once, and then stay on steady.
    5. Release the check button when the Ready, Data, and Attention light are on steady.
    6. The control panel will display SELECT LANGUAGE .
    7. Press c00224697.jpg (Down Arrow) button once. The control panel will display COLD RESET .
    8. Press c00224695.jpg (Select). The printer will perform a cold reset and then continue its power-on sequence.
  7. If this message persists, contact an HP-authorized service or support provider. Hope it helps, if so do rate the solution

Dec 24, 2010 | HP LaserJet 4600 Printer

1 Answer

Hhp deskjet 5550 - orange and green light keep


1) Close the print head cover, and turn off the printer. While pressing the Resume/Cancel button, press the Power button. (Do not release the buttons. The LED lights in green to indicate that a function is selectable.) 2) While holding the Power button, release the Resume/Cancel button. (Do not release the Power button.) 3) While holding the Power button, press the Resume/Cancel button 3 times, and then release the Power and Resume/Cancel buttons. 4) When the LED stops blinking and lights in green, press the Resume/Cancel button 4 times. Finally press the Power button.

Jun 09, 2009 | HP DeskJet 5550 InkJet Printer

1 Answer

One page jammed after switching off when 1 page printed. Orange light on


Hi ,


First off all u switched off the printer and on switch off mode press the green button and on pressing the button switch on the printer hold that button for 5 seconds and then release the button whenever u realese the button the printer start migrating . After migrating if the printer have same problem then u reinstall the printer driver and again reinstall the driver, after reinstalling the driver the printer will working fine .

May 26, 2009 | HP LaserJet 1010 Printer

1 Answer

C4180 Won't Power On


Make sure the plug is all the way into the AC adapter. Then, you will need someone to verify the output of the AC adapter. You should have a 16VDC and a 32VDC output from the adapter. If that is good, you have an internal problem with the printer. If the output voltage(s) are missing you will need to replace the AC adapter.

Here are the specs:
  • Input voltage: AC 100 to 240 V ~ 1 A 50–60 Hz, grounded
  • Output voltage: DC 32 Vdc===940 mA, 16 V===625 mA
  • HP part# 0957-2146 Call 1-800-227-8164 for availability.

  • Nov 19, 2008 | HP PhotoSmart C4180 All-in-One Color...

    4 Answers

    HP PhotoSmart C4180 All-in-One... Problem:


    Hi,

    Try the resetting the printer to factory defaults.

    Steps:

    1.Turn the Printer OFF, unplug the power cabled from the back of the printer and from the wall outlet.

    2.Then, Press and hold the ON button for 30 -60 seconds

    3.Take the Ink Cartridges out, Unplug the printer power cable while its ON, press and hold CANCEL and COLOR COPY button and connect the Power cord while holding the buttons.keep Holding the buttons until the printer goes off ,release the button and Push the ON button.

    Please let me know, the status. GoodLuck cheers!!

    Thank you ...

    Feb 15, 2008 | HP PhotoSmart C4180 All-in-One Color...

    Not finding what you are looking for?
    HP Photosmart 4180 All-in-One Printer Logo

    361 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top HP Office Equipment & Supplies Experts

    Seeker5211
    Seeker5211

    Level 3 Expert

    1089 Answers

    kakima

    Level 3 Expert

    102366 Answers

    mukhtar21 shaikh
    mukhtar21 shaikh

    Level 3 Expert

    2017 Answers

    Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...