Question about Heating & Cooling

1 Answer

I have a Sunbeam Slurples machine and I just can't get it to work. It keeps freezing the blades to the inner cyclinder. I am really disappointed. Please help.

Posted by on

  • Anonymous Dec 22, 2008

    the blades on my sunbeam slurples are also freezing to the canister


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi, I also have a Sunbeam Surples machine, mine works fine if you use real Coke, Sprite etc... but also found that the blades are frezzing to the inner cyclinder if I use a syrup based soft drink such as Soda Stream.

Posted on Jan 05, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where can I get a fan blade for window air condition model sck14200dr.

Go to your local hardware store go down the aisle where they have the new window A/C units and BUY A NEW ONE!!

Aug 19, 2011 | Sunbeam SCA103RWB1 Room Air Conditioner

1 Answer

Need a new fan blade

you can order online thru manufacture or johnstone supply sells to public

Sep 13, 2010 | Sunbeam Heating & Cooling

1 Answer

How to clean the inner blades

compressed air.may have to diassemble to access the fan blades.

Feb 14, 2010 | Heating & Cooling

3 Answers

I'm looking for a free users manual for a Sunbeam floor a/c that I purchased at auction. Works great, but need to know how to hook up the drainage tube thanks

Do you have the exact model number of your Sunbeam A/C? Check the links below and download the free manuals:

I'm not exact sure if this is the model for your A/C

Hope this helps and have a great day!

Jul 07, 2009 | Sunbeam Heating & Cooling

1 Answer

Sunbeam KY-25/Y fan problem

I have a sunbeam ky-25 portable a/c that needs new exhaust fan but I can't find one

Jun 27, 2009 | Sunbeam Heating & Cooling

2 Answers

Sunbeam Slurples Machine won't work

have you tried replacing the blades so that there is not any spacew between them and the barrel for the ice to acccumulate.

Dec 17, 2008 | Heating & Cooling

1 Answer

Amana window air conditioner unit keeps freezing.

There are 2 causes for freezing. Lack of air flow or shortage of Freon. After defrosting, start the machine and look for an even pattern of water condensing on all the coils. If the cooling is even and complete on all the coils, see if the coil is so dirty that it restricts the air flow. The fan blade can build up dirt and need to be cleaned, too. If the cooling (condensation) is not complete, you have a Freon problem. Some of it could have leaked out or the metering tubes could be partially pllugged up (on the inside of them).

Jul 22, 2008 | Amana Heating & Cooling

1 Answer

Sunbeam air conditioner

It is normal for water to collect in the lower base of an air conditioner. See the section entitled: "There is water sloshing around inside." If water leaks out the front it is usually because the unit is tilted forward in the window frame. All air conditioners should be installed so they tilt slightly back to allow for proper removal of the condensation collected.

There is water sloshing around inside All window air conditioners will remove moisture from the air if there is any. Most window air conditioners collect this moisture in the bottom pan of the air conditioner and attempt to evaporate the moisture. The evaporation process works as follows: First, the water drips down off of the cold evaporator coils on the front of the unit. Then the water collects in the bottom of the air conditioner base, the "pan." If the air conditioner is installed properly it will be tilted slightly back.

The water then collects near the back of the unit. On some units, the fan blade used to cool the rear condensing coils will have a rim on the outside of the fins of the blade. This rim, or "slinger," will come close to touching the inside of the air conditioner pan when the fan is spinning. As the water collects in the pan and reaches the depth necessary for the fan ring to touch it, the ring will lift some of the water up and the fan will blow it at the condensing coils. Because the coils are warm, they will evaporate the moisture to the outside.

While this is happening it is normal to hear water splashing and sloshing around. As long as there is no water leaking inside the room that is being cooled there is no cause for concern.

Never drill into the bottom of and air conditioning unit to "let the water out."

if this helps please give me a fix ya

Jul 14, 2008 | Sunbeam Heating & Cooling

1 Answer

No heat

Well on some a/c units you need to put water in a special area so that the machine can cool it down to the freezing point and blow air over it therefore releasing cool air. If that doesn't work you can always return it for a new one. Hope this helped. =)

Feb 25, 2008 | Heating & Cooling

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

465 people viewed this question

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts


Level 3 Expert

2046 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Cris Sparks
Cris Sparks

Level 2 Expert

338 Answers

Are you a Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides