An expert who has written 20 answers of more than 400 characters.
An expert who has answered 20 questions.
Re: sOFTWAE FOR SONY HANDYCAM hc32e FOR VISTA
Vista should have the driver you need. All you need to do is plug it in
via USB. You will then get a message on the computer saying it is
searching for your correct driver. Once it says the driver was
successfully installed you should be able to use it fine.I went to a few other forums to see if anyone else was having the same
problem as me. It turns out a lot of people are having this issue with
Sony camcorders. I plugged it in via firewire instead of usb and the
driver was installed right away. For some reason it just won't work
with a usb on Vista.
when Sony HC32E didn't work with Vista despite trying various
things. After buying a Firewire cable it now works immediatelly.. My only advise would be that most firewire cables have 1 or even 2 "6
pins" ends. Laptops don't usually have this connection (neither does
the Camcorder) so make sure you buy one with two small ends - I bought
the "Belkin 3-in-1 Firewire cable kit" It was about £22.99 but I'm sure
you can find it cheaper ont he internet if you have patience - it comes
with 2 adaptors to place on the end of the "6 pins"..
a 6ya Expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to an Expert (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I hope the following information is helpful.
If you are trying to install the driver for the Broadcom ethernet NIC that was pre-installed (NOT an ethernet card that you purchased and installed yourself), there is a softpack (updated driver installation) download available from HP/Compaq. It will install the driver automatically for you, just download it from the link below and run the ".exe" file.
IMPORTANT: Check to be sure that your current Operating System, and model of the network device you are trying to install, are BOTH listed below BEFORE you download!
This is a software / driver update for the HP Compaq d530 ultra-slim desktop: All Models Supported network devices: BCM5906MBroadcom 10/100/1000 5782 based NICBroadcom 570x 10/100 Integrated controllerBroadcom NetXtreme Gigabit Ethernet 5782Broadcom NetXtreme Gigabit Ethernet PCI-ExpressNetXtreme(tm) 10/100/1000 Gb NIC Supported Operating Systems:Microsoft Windows 2000
Microsoft Windows 98
Microsoft Windows NT 4.0
Microsoft Windows Vista Business 32 Edition
Microsoft Windows Vista Business 64 Edition
Microsoft Windows Vista Enterprise 32 Edition
Microsoft Windows Vista Enterprise 64 Edition
Microsoft Windows Vista Home Basic 32 Edition
Microsoft Windows Vista Home Basic 64 Edition
Microsoft Windows Vista Home Premium 32 Edition
Microsoft Windows Vista Home Premium 64 Edition
Microsoft Windows Vista Starter 32 Edition
Microsoft Windows Vista Ultimate 32 Edition
Microsoft Windows Vista Ultimate 64 Edition
Microsoft Windows XP Home Edition
Microsoft Windows XP Professional
Microsoft Windows XP Professional x64 EditionINSTALLATION INSTRUCTIONS:
1. Download the file by clicking the "Download" or "Obtain Software" button and
saving the file to a folder on your hard drive (make a note of the folder where
the downloaded file is saved).
2. Double-click the downloaded file and follow the on-screen instructions.LINK where file can be downloaded:HP/Compaq Support-Broadcom Driver download Again, I hope this information is what you neededto install your network device. Should this not answer your question, please come back, provide more details of your problem, and we will be happy to help!Best of luck to you!
I am sorry but you have to purchase the MS off ice package from microsoft. Your product key you are refering to is for the Windows program only. We cannot provide you with a key as it is considered software piracy.
Hallow Dear, Please use this link to download Drivers for your PC (20M) XP/Vista- ftp://ftp.hp.com/pub/softpaq/sp38501-39000/sp38688.exe Operating Systems Microsoft Windows 2000 Microsoft Windows XP Home Edition Microsoft Windows XP Media Center Edition Microsoft Windows XP Professional Microsoft Windows XP Tablet PC Edition Microsoft Windows Vista Enterprise 32 Edition Microsoft Windows Vista Home Basic 32 Edition Microsoft Windows Vista Home Premium 32 Edition Microsoft Windows Vista Business 32 Edition Microsoft Windows Vista Starter 32 Edition Microsoft Windows Vista Ultimate 32 Edition Microsoft Windows Vista Enterprise 64 Edition Microsoft Windows Vista Home Basic 64 Edition Microsoft Windows Vista Home Premium 64 Edition Microsoft Windows Vista Business 64 Edition Microsoft Windows Vista Ultimate 64 Edition This Will Completely Solve your Prob; if there is no any internal Hardware Problems with Quick Lunch Buttons (I feel there is no any coz u mention about Ding Sound. That mean your system is recognizing your key input & all you need is Just program those keys – above setup will do that) ** If you didn’t solve your prob; my advice is take your lap to a good technician with component level Repair skills. Thank you & Best Regards Dinu….