Memorex m v d 2042 is locked

Hi,
The default password is 1234.
or..
Memorex MVD 2037 & Memorex MVD 2051

1. Turn on the Player.
2. Press the Open / Close button, (keep tray open)
3. Press the Clear button.
4. Press 1,3,6,9.
5. Press the Region you want, 0 for Region free.1 for Region 1 and so on
6. Turn your player off and then back on.

N.B if the hack does not work you may find you have to ommit step 3 and try again.so the hack will be

1.Turn on the Player
2.Press the Open / Close button , (keep tray open)
3.Press 1,3,6,9
4.Press the button for the Region you want, 0 for Region free, 1 for Region 1 and so on.
5.Turn your player off and then back on.
Alex

Try a cleaner disk for the player that is stopping sometimes players get very dusty inside - dust around laser eye will cause interuptions

IF YOUR GETTING A BLUE SCREEN YOUR NOT PUTTING A SIGNAL OUT TO THE TV DO YOU GET A MENU OSD FROM THE DVD PLAYER IF NOT CK CONNECTIONS AND VIDEO SOURCE

mt memorex dvd player says ``key lock on´´ and i don't know how to quit that and i can't opened with the remot control
Help please!!!!!

Mine did the same thing. I unplugged power, took off bottom ( seven screws on mine), took bar off covering lens ( two screws) cleaned rod that the door slides on with q-tip damp with rubbing alcohol. dabbed the rod afterwards with machine oil put everything back and now it works!

Me too. Only for Double Layer DVDs.

Try a 5 digit code: 20831

When you get no disk error, that is because of a problem with the optical laser lens that is dirty, faulty or opaque, and will start operating on certain disks better than others. Often the problem get worse in time.
Try first using a DVD lens cleaner disk to clean the lens. If that does not work you will need to disassemble the drive , and clean lens directly with q tips and isopropyl alcohol, or to replace the DVD lens, or the whole drive unit.

This is all I could find ..... Memorex DVD-2000 C/P / MVD-2020 / MVD-2022 / MVD-2027 / MVD-2027 A / MVD-2028 / MVD-2029 / MVD-2030 / MVD-2037 / MVD-2051

1. Open the disc tray
2. Press CLEAR
3. Press 1, 3, 6, 9
4. Enter region (0 = multi-region)
5. Close the disc tray
6. Turn the player off

Memorex MVD-2042

1. Press OPEN/CLOSE
2. Press 9, 7, 3, 5 (or 1, 3, 6, 9 for the "suffix B, C, D" model)
3. The setup menu will appear
4. Press RIGHT to move the cursor to highlight the regions
5. Select region using UP/DOWN (0 = multi-region)
6. Press ENTER
   (or try the instruction for MVD-2020 above)

Memorex MVD-P1072

1. Turn on the player (without a disc inserted)
2. Press SETUP
3. Press 9, 2, 1, 0
4. Select region (0 = multi-region)

If you have tried all the codes the manual has it may be the remote does not support your model. Here is a lin to a remote I think will work on ebay:
http://cgi.ebay.com/Memorex-DVD-remote-control-MVD-2022-MVD-2042_W0QQitemZ280186652283QQihZ018QQcategoryZ91388QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

You also can try another universal reote brand that might support your unit. Hope this helps.