Question about Brother Printers & Copiers

1 Answer

Brother HL 2140: Toner ledlight lit, stopped printing. Cleaned Coronary Wire. Toner Cartridge new - 2 weeks old.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 66 Answers

Hi Adsl34xg,
The cartridge that comes with the printer (or starter cartridge) has a yield of 1,000 pages @ 5% coverage. It probably really has run out of toner. Replace with a new cartridge to see if you can print. A replacement cartridge should give you 2,500 pages @ 5% coverage.

Posted on Dec 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HL 2140 printer need ink cartridge installation instructions


This is a laser jet printer there is no ink, it uses toner. Purchase a toner cartridge and open the lid, remove old cartridge and insert new one. The part number for the cartridge is TN360. Good luck. here is a place that sells them for $50.00 http://www.lasercartridgeplus.com/tn360-tn-360-brother-hl-2140-toner.html You might be able to find it cheaper if you look around.

Jan 17, 2011 | Brother Printers & Copiers

Tip

Resetting Blinking Toner Light HL-2140


Here is the procedure for resetting the Toner flashing light on Brother HL-2140 (sources for other answers here and self testing - specific to HL-2140)
  • Open the front cover and leave open.
  • Turn the printer off.
  • Hold the "white button" while turning the printer on. (All panel lights should be on.)
  • Release the "white button".
  • Press the "white button" 2 times (Pause, wait for all lights to come on.)
  • Press the "white button" 5 times. (All lights to come on again, then go out.)
  • Cancel "maintenance driver" install, if prompted
  • Close cover.
  • Power cycle printer.
fred410_0.jpg

This will:
  • reset the toner light (stop blinking)
  • restore the printing darkness (when toner light flashes, printer prints lighter to save toner)
  • keeps the printed page counts and drum life info

on Mar 06, 2011 | Brother HL 2140 Laser Printer

Tip

Brother HL-2140 does not print even if toner is full


In the Brother HL-2140 printer, it shows the Toner led light is on. Even if there is plenty of toner on the cartridge. It just wont print anything after initiating a print job since the toner light is on.Here is a trick on what you need to do:

1. Turn off the Brother HL-2140 printer.
2. Open the front access door to take out the toner from the carriage.
3. Notice that on both sides of the toner, you will see a small hole which is most probably the sensor.
4. What you do is to cover the sensor holes with masking tape and color the tape with black marker. Or, you can also use an electrical tape to cover them.
5. Shake the toner so that the ink inside will redistribute evenly.
6. Return the toner to the carriage and try to initiate a print again.

That's it!

on Jan 13, 2010 | Printers & Copiers

1 Answer

Printer not printing documents HL-2140 model


when the toner light is on this means the toner cartridge is empty and ned to be replaced. After its replaced it will start working normally again.

Jun 02, 2010 | Brother HL 2140 Laser Printer

1 Answer

I have a new Hl 2140 and haven´t printed more than 100 copys but now the toner light is on and the printer refuses to print


Tip the toner cartridge from end to end to redistribute the toner. You will get more mileage out of it, if it is simply a low toner issue.

Apr 21, 2010 | Brother HL 2140 Laser Printer

1 Answer

HL 2140 page printing all black


Dear sir, I know what is problem? your toner cartridge is demage please change it also you re-install your old toner then quickly take a decission
Thanks
xptareq2000
wiz
all the best

Oct 02, 2009 | Brother HL 1440 Laser Printer

1 Answer

Printer won't print error message corona wire needs cleaning


When you experience a persistent problem like this right at the beginning - listen to your own good advice. Take it back to the store and exchange it for a new one.

Jul 30, 2009 | Brother HL 2140 Laser Printer

3 Answers

Brother 2140 toner light on, won't even try to print.


To get every bit of toner powder out of the cartridge, first remove the toner unit from the drum assembly. Second, find the little circular window on the right-side of the toner cartridge. Third, place a piece of black electrical tape over the clear window, cannot be clear tape. Fourth, re-install the toner cartridge into the drum assembly. Last, put the complete unit back into your printer. This worked for me.

Apr 05, 2009 | Brother HL 2140 Laser Printer

1 Answer

Brother toner light stays on


I think you have to leave the cover open and hol down the stop/clear key.

Dec 27, 2008 | Printers & Copiers

2 Answers

Toner


Trick the thing. Put a piece of black electrical tape on the "eye". (Take cartridge out, on right side there's a small clear hole). Worked for me!

Jun 30, 2008 | Brother HL 2140 Laser Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

266 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Printers & Copiers Experts

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Rick Johnson
Rick Johnson

Level 2 Expert

84 Answers

John mullen

Level 2 Expert

245 Answers

Are you a Brother Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...