Question about Sony Handycam DCR-DVD105 DVD Camcorder

1 Answer

Getting a "use new AC adapter or reinsert."

Any idea why I would get the message "use a new AC adapter or reinsert" on my screen when I turn on my camera to use?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 32 Answers

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Re Fuji finepix, keep getting message turn off camera, turn on again as lens won't extend, so camera not useable, batteries fresh. any ideas? thanks, robin


Remove and reinsert the batteries or disconnect and reconnect the AC power adapter/DC coupler. If the problem persists, contact your FUJIFILM dealer.
Before that:
Carefully check if and eventualy where the lens is blocked. Don't touch the front lens. Feeling for any movement on the edge not on the glass. If there is not any obstruction, then perhaps the motor that should move the lens is defect. If you can find anything that blocks the lens, ask a technician if he / she can remove is. Or else I'm affraid you have to visit your FUJIFILM dealer.

Oct 31, 2013 | Fujifilm Finepix S2980

1 Answer

Screen goes black shortly after turning on


I'm sorry that the screen goes black shortly after turning on the camcorder. I suggest that you perform a manual power reset and check the operation. Follow the steps to perform a manual power reset:
  1. Turn off the camcorder.
  2. Disconnect AC power adapter.
  3. Remove the battery pack.
  4. Remove the lithium button-cell battery.
  5. Move the POWER switch to the CAMERA position for 15 seconds.
  6. Move the POWER switch to the OFF position.
  7. Reinsert the lithium button-cell battery.
  8. Reconnect the AC power adapter or reinsert the battery pack.
  9. Turn on the camcorder.

Jan 04, 2011 | Sony Handycam DCR-SR42 Camcorder

1 Answer

Sony handycam DCR-DVD205: use new ac adapter or reinsert


Remove the battery insert your AC adaptor turn on your DVD CAM if it work fine reinstall the battery set CAM to off position the amber light should be on to indicate battery is charging
You got that msg depend what function you use if the CAM calculated the battery not enough to run or finish this task it display that msg for you to use AC adaptor to ensure no power corrupted such in formating the disc
Some time system control is faulty even you use AC adaptor it still display this msg I hope that is not in your case
Let me kown how you go with this problem

Nov 30, 2008 | Sony Handycam DCR-DVD205 DVD Camcorder

1 Answer

Lens not going in & getting stuck


TIPS:
1.)NEVER PUSH THE LENS IN AFTER CAMERA DIES, BUY A NEW BATTERY IMMEDIATLY AND TURN IT BACK ON, CLOSING THE LENS!

2.)NEVER USE AN AC ADAPTER, USE A RECHARGEABLE BATTERY OR A REGULAR BATTERY!

..to fix this...

Do as i say..

1.) Remove battery
2.) Remove front plate (screw driver may be needed)
3.) Check all gears, make sure they are correctly fitted in place)
4.) Move the gear manually to make the lens come out.
5.) keep it out, put the front plate back together.
6.) reinsert the battery, turn it on.


or...
1.) Remove the battery.
2.) Wait about 6-8 hours.
3.) Reinsert the battery.

or...
1.) Remove the battery.
2.) Try hooking it up through AC adapter, put correct voltage.
3.) Try turning it on.
4.) Remove AC adapter, reinsert battery.
5.) Turn it on.
If nothing happens just tell me..

Hope this may help;

Regards,
VOTIT

Oct 10, 2008 | Samsung S760 Digital Camera

1 Answer

The screen is not going on ? its black and when i turn it on only the lens part goes on and when i turn it off its stays the same way ? so wat should i do ?


TIPS:
1.)NEVER PUSH THE LENS IN AFTER CAMERA DIES, BUY A NEW BATTERY IMMEDIATLY AND TURN IT BACK ON, CLOSING THE LENS!

2.)NEVER USE AN AC ADAPTER, USE A RECHARGEABLE BATTERY OR A REGULAR BATTERY!

..to fix this...

Do as i say..

1.) Remove battery
2.) Remove front plate (screw driver may be needed)
3.) Check all gears, make sure they are correctly fitted in place)
4.) Move the gear manually to make the lens come out.
5.) keep it out, put the front plate back together.
6.) reinsert the battery, turn it on.


or...
1.) Remove the battery.
2.) Wait about 6-8 hours.
3.) Reinsert the battery.

or...
1.) Remove the battery.
2.) Try hooking it up through AC adapter, put correct voltage.
3.) Try turning it on.
4.) Remove AC adapter, reinsert battery.
5.) Turn it on.
If nothing happens just tell me..

Hope this may help;

Regards,
VOTIT

DON'T FORGET TO RATE;

Oct 10, 2008 | Cameras

1 Answer

Samsung digimax s700


TIPS:
1.)NEVER PUSH THE LENS IN AFTER CAMERA DIES, BUY A NEW BATTERY IMMEDIATLY AND TURN IT BACK ON, CLOSING THE LENS!

2.)NEVER USE AN AC ADAPTER, USE A RECHARGEABLE BATTERY OR A REGULAR BATTERY!

..to fix this...

Do as i say..

1.) Remove battery
2.) Remove front plate (screw driver may be needed)
3.) Check all gears, make sure they are correctly fitted in place)
4.) Move the gear manually to make the lens come out.
5.) keep it out, put the front plate back together.
6.) reinsert the battery, turn it on.


or...
1.) Remove the battery.
2.) Wait about 6-8 hours.
3.) Reinsert the battery.

or...
1.) Remove the battery.
2.) Try hooking it up through AC adapter, put correct voltage.
3.) Try turning it on.
4.) Remove AC adapter, reinsert battery.
5.) Turn it on.
If nothing happens just tell me..

Hope this may help;

Regards,
VOTIT

DON'T FORGET TO RATE

Aug 21, 2008 | Samsung Digimax A400 Digital Camera

1 Answer

No LCD display


TIPS:
1.)NEVER PUSH THE LENS IN AFTER CAMERA DIES, BUY A NEW BATTERY IMMEDIATLY AND TURN IT BACK ON, CLOSING THE LENS!

2.)NEVER USE AN AC ADAPTER, USE A RECHARGEABLE BATTERY OR A REGULAR BATTERY!

..to fix this...

Do as i say..

1.) Remove battery
2.) Remove front plate (screw driver may be needed)
3.) Check all gears, make sure they are correctly fitted in place)
4.) Move the gear manually to make the lens come out.
5.) keep it out, put the front plate back together.
6.) reinsert the battery, turn it on.


or...
1.) Remove the battery.
2.) Wait about 6-8 hours.
3.) Reinsert the battery.

or...
1.) Remove the battery.
2.) Try hooking it up through AC adapter, put correct voltage.
3.) Try turning it on.
4.) Remove AC adapter, reinsert battery.
5.) Turn it on.

Hope this may help;

Regards,
VOTIT

DON'T FORGET TO RATE

Aug 21, 2008 | Pentax Optio S4 Digital Camera

1 Answer

Nikon coolpix s1


TIPS:
1.)NEVER PUSH THE LENS IN AFTER CAMERA DIES, BUY A NEW BATTERY IMMEDIATLY AND TURN IT BACK ON, CLOSING THE LENS!

2.)NEVER USE AN AC ADAPTER, USE A RECHARGEABLE BATTERY OR A REGULAR BATTERY!

..to fix this...

Do as i say..

1.) Remove battery
2.) Remove front plate (screw driver may be needed)
3.) Check all gears, make sure they are correctly fitted in place)
4.) Move the gear manually to make the lens come out.
5.) keep it out, put the front plate back together.
6.) reinsert the battery, turn it on.


or...
1.) Remove the battery.
2.) Wait about 6-8 hours.
3.) Reinsert the battery.

or...
1.) Remove the battery.
2.) Try hooking it up through AC adapter, put correct voltage.
3.) Try turning it on.
4.) Remove AC adapter, reinsert battery.
5.) Turn it on.

Hope this may help;

Regards,
VOTIT

DON'T FORGET TO RATE

Aug 18, 2008 | Nikon Coolpix S1 Digital Camera

2 Answers

Lens cover error


TIPS:
1.)NEVER PUSH THE LENS IN AFTER CAMERA DIES, BUY A NEW BATTERY IMMEDIATLY AND TURN IT BACK ON, CLOSING THE LENS!

2.)NEVER USE AN AC ADAPTER, USE A RECHARGEABLE BATTERY OR A REGULAR BATTERY!

..to fix this...

Do as i say..

1.) Remove battery
2.) Remove front plate (screw driver may be needed)
3.) Check all gears, make sure they are correctly fitted in place)
4.) Move the gear manually to make the lens come out.
5.) keep it out, put the front plate back together.
6.) reinsert the battery, turn it on.


or...
1.) Remove the battery.
2.) Wait about 6-8 hours.
3.) Reinsert the battery.

or...
1.) Remove the battery.
2.) Try hooking it up through AC adapter, put correct voltage.
3.) Try turning it on.
4.) Remove AC adapter, reinsert battery.
5.) Turn it on.

Hope this may help;

Regards,
VOTIT

DON'T FORGET TO RATE

Jun 17, 2008 | Nikon Coolpix S1 Digital Camera

1 Answer

Screen shows use new ac adapter or reinsert


i found a solution to my problem. i just let the cam on until the battery is totally empty and recharge it.
tell me if it worked for you

Mar 15, 2008 | Sony DCR-HC26 Mini DV Digital Camcorder

Not finding what you are looking for?
Sony Handycam DCR-DVD105 DVD Camcorder Logo

Related Topics:

218 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Cameras Experts

Larry Stiles
Larry Stiles

Level 2 Expert

286 Answers

kakima

Level 3 Expert

102366 Answers

sonic boom...
sonic boom...

Level 3 Expert

1557 Answers

Are you a Sony Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...