Question about Kitchen Ranges

1 Answer

Error code GE induction cooktop

GE induction cooktop PHP900 worked fine yesterday and now I turn it on and the control panel flashes "E"

Posted by on

  • Anonymous Mar 19, 2009

    I have had this problem twice now, both times after a whole house power outage.  GE service said to power down the cooktop for 15 minutes and then power up again.  It didn't work.  So they came out to replace the whole shebang, since the power control was backordered for a month and I freaked out.  So, as they start to remove the old cooktop, before they disconnect the power, we discover that low-and-behold, the cooktop started working!  Maybe a jiggling of the wires was all it took.  It worked until this morning, when the power when out again.  Nothing now.  Oh joy.  I'm sending the GE back and looking at a new brand.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,197 Answers

Display flashing “E” alone (no other letter)
A hardware error has occurred.Call for service.

Posted on Dec 17, 2008

  • Jyackle5
    Jyackle5 Dec 17, 2008

    That is from the GE web sight.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error Code E0 39 after replacing induction Control module. Our Range is Frigidaire CPCS3085LF, apparently the module is not talking to the panel. is there a fix?


Execute following sequence to force cooktop reconfiguration (Be sure the good ESEC20 UIB is installed into the cooktop)
1-Put all rotary control to the first detent position clockwise (1 o'clock).
2-Put all rotary control to the first detent position counterclockwise (11 o'clock). The system should then reconfigure, showing walking dashes on the cooking zones displays.
3-Put all rotary controls to "Off" position. There should be no more error code and the cooktop is ready for operation.
Frigidaire Range Stove Oven Surface Element Board 318329620 Frigidaire Range Stove Oven Oven Control Board 318347100

Jun 12, 2016 | Frigidaire Kitchen Ranges

1 Answer

GE JS900 electric range stovetop works fine but no lights or clock on control panel so the oven cannot be turned on.


You will probably have to replace the main control board- the cooktop operates independently of the ovens, so your symptom is not uncommon... GE Range Stove Oven Oven Control Board WB27T10416

Jan 09, 2016 | GE Kitchen Ranges

1 Answer

What does error code E39 mean


Hello friend, thanks for your post!

I see your asking for the meaning of an "E39" error code. Your appliance is listed under Electrolux range. Would you be able to provide me your model number so that I can verify the correct meaning for "E39"? On a range you can locate the serial tag (which lists your model number) on the lower storage drawer on the right hand side. On an induction cooktop it would be located on the outside of the appliance base possibly on the edge or bottom under the unit. I look forward to assisting you. -Matt

Jul 26, 2014 | Electrolux 30" Induction Built-In Range...

2 Answers

Feature not available


I had the same problem with a new kitchenaid range which they have agreed to replace after 1 month. Oven shut off a couple times while baking and feature not available displayed when trying to turn on oven again. I tried starting clean cycle and waiting a couple minutes for element to heat then cancelled clean cycle. Oven worked fine after this but this shouldnt be a solution, obviously something not wired right.

Dec 09, 2013 | KitchenAid KIRS608BSS Induction Electric...

1 Answer

Ge glass cooktop range won't bake or broil. error fault codes f7 and g6


see the cause and fix it for F7:

Determine if problem is with the Key Panel or Control by:

1. Pushing CLEAR/OFF pad.

2. Disconnecting Ribbon Cable from control and waiting at least 32 seconds to see if Code recurs

If code recurs, problem is in the control. Replace control.

If code does not recur, problem is with the Key Panel.

Jul 20, 2012 | GE Stove / Oven / RanMain Glass Top Assy....

1 Answer

Start Button Failed on Whirlpool Electric Range Model GY396LXPQ02


It sounds like you have an oven problem rather than a start button problem. Is there an error code? If so list your model and error code on a search engine and you will find error codes. Or you can just list make model number and error codes and you can find a chart of Whirlpool error codes. I have done this with no problem. That should tell you the exact problem and things to try.

It may be neither issue you mentioned. It could be a bad element or a short.

May 29, 2009 | Whirlpool GY396 Electric Kitchen Range

2 Answers

Could you tell me what F11 code means?


F11 error code means there is a problem with the Control panel. Could be melted wiring, etc, since you left the oven standing. However, you can try unplugging the device from the power socket for about 5 minutes and reconnect. If the error goes away, then well and good; if not, you may have to replace the panel control.

Oct 13, 2008 | Frigidaire Kitchen Ranges

1 Answer

What does error code 35 mean on a kenmore elite induction cooktop model 790.4290. I believe the unit is made for Kenmore by Electrolux


it has a fatal or error condition. try turning the power off and than back so it the cook top can reset it's self. if that does not work you will need to contact sears for service.

Aug 23, 2008 | Electrolux Kitchen Ranges

1 Answer

F7 code flashes and beeps


F7 stuck keypad
Stuck keypad may mean relay is turned on.
Determine if problem is with the Key Panel or Control by:
1. Pushing CLEAR/OFF pad.
2. Disconnecting Ribbon Cable from control and waiting at least 32 seconds to see if Code recurs

If code recurs, problem is in the control. Replace control.

If code does not recur, problem is with the Key Panel.

Dec 10, 2007 | GE Profile JDP47 Electric Kitchen Range

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

1,113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

yadayada
yadayada

Level 3 Expert

63661 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...