Question about Canon MultiPASS MP730 All-In-One InkJet Printer

6 Answers

Canon mp730 Error message "Waste ink near full"

I was performing a head cleaning and then the printer gave me a "Waste ink near full" error message and now the printer will not print. Is there an easy fix? I think I will also need to know how to reset the ink counter or remove the error message. What parts will I need and where is the best source to procure them?

Posted by on

6 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi and welcome to FixYa,

Initially, clean/replace the waste ink pad. Replacement are available from most Canon Service Centers.. Thereafter perform a reset on the waster counter by:

  1. Enter SERVICE MODE.--- by pressing Menu-Copy-#
  2. Select TEST MODE.
  3. Select [8] PRINTER TEST in TEST MODE.
  4. Select 3. [EEPROM CLEAR].
  5. Select 0. [INK COUNT].
  6. Press the [OK] key.
  7. Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.
or
  1. Hit the “menu”: Key
  2. Hit “Copy” Key
  3. Hit “#” Key
  4. Scroll thru the menu headings until you come to “Test Mode” - 12th heading
  5. Hit the “3′ button- this will bring up Eprom Clear
  6. Hit “0′ button
  7. Hit the “Stop” button
Good luck and Thank you for using FixYa. Happy Holidays.

Posted on Dec 17, 2008

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,226 Answers

Hello,
You have to clean the waste ink and or disassemble and wash the waste ink and fit it again.


To reset waste tank full error in MP730.

1. Hit the "menu": Key
2. Hit "Copy" Key
3. Hit "#" Key
4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading
5. Hit the "3" button- this will bring up Eprom Clear
6. Hit "0" button
7. Hit the "Stop" button

melnavz

Posted on Dec 17, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,110 Answers

Window.google_render_ad(); TRY to reset waste tank full error in Canon Smartbase MP730 procedures: 1. Hit the “menu”: Key
2. Hit “Copy” Key
3. Hit “#” Key
4. Scroll thru the menu headings until you come to “Test Mode” - 12th heading
5. Hit the “3′ button- this will bring up Eprom Clear
6. Hit “0′ button
7. Hit the “Stop” button

Posted on Dec 17, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Canon Master
  • 13,433 Answers

To reset waste tank full error in MP730.

1. Hit the "menu": Key
2. Hit "Copy" Key
3. Hit "#" Key
4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading
5. Hit the "3" button- this will bring up Eprom Clear
6. Hit "0" button
7. Hit the "Stop" button


note that this doesn't actually empty or clean the waste ink tank.

Posted on Dec 17, 2008

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 40 Answers

Hello,

Please remove the ink cartridges and reinstall them with the computer and printer powered on. Normally a troubleshooting window will pop up after reinstallation asking if the ink cartridges are new or not - select that they are old.

If you continue to receive this error message, please respond as such.

Posted on Dec 17, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 351 Answers

Dear BBrunt,

1-press the "menu" key
2-press the"copy" key
3-press the"#" key
scroll thru the menu heading until you come to "counter"
press "ok"
press "menu"
and select "clear all" it will ask you to "please wait"
then press menu two times
restart your printer
it will work


Be Happy Always

Regards

Posted on Dec 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error message on printer; Waste ink near full


Hi you can try this.

To reset waste tank full error in MP730.

1. Hit the "menu": Key
2. Hit "Copy" Key
3. Hit "#" Key
4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading
5. Hit the "3" button- this will bring up Eprom Clear
6. Hit "0" button
7. Hit the "Stop" button


Can only try then your printer go on longer but some time the other you need to clean out the waste ink it inside the printer go to open up all.



Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.

All The Best: Pineworks

Jan 27, 2010 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

What is is when the Printer stats:waste ink near full


Hello you can try see it this will hel

To reset waste tank full error in MP730.

1. Hit the "menu": Key
2. Hit "Copy" Key
3. Hit "#" Key
4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading
5. Hit the "3" button- this will bring up Eprom Clear
6. Hit "0" button
7. Hit the "Stop" button


Can only try then your printer go on longer but some time the other you need to clean out the waste ink it inside the printer go to open up all.



Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.

All The Best: Pineworks

Jan 23, 2010 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

How do I change the waste ink absorber in a canon ink jet printer


Hi you can try this.

To reset waste tank full error in MP730.

1. Hit the "menu": Key
2. Hit "Copy" Key
3. Hit "#" Key
4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading
5. Hit the "3" button- this will bring up Eprom Clear
6. Hit "0" button
7. Hit the "Stop" button


Can only try then your printer go on longer but some time the other you need to clean out the waste ink it inside the printer go to open up all.



Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.

All The Best: Pineworks

Dec 28, 2009 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

Warning saying "Waste Ink Near Full" - where is this waste ink located and how do you change/empty?


Hi you can try this.

To reset waste tank full error in MP730.

1. Hit the "menu": Key
2. Hit "Copy" Key
3. Hit "#" Key
4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading
5. Hit the "3" button- this will bring up Eprom Clear
6. Hit "0" button
7. Hit the "Stop" button


Can only try then your printer go on longer but some time the other you need to clean out the waste ink it inside the printer go to open up all.



Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.

All The Best: Pineworks

Sep 29, 2009 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

Canon multipass mp730 / waste ink near full


Ok try using the codes

To reset waste tank full error in MP730.

1. Hit the "menu": Key
2. Hit "Copy" Key
3. Hit "#" Key
4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading
5. Hit the "3" button- this will bring up Eprom Clear
6. Hit "0" button
7. Hit the "Stop" button


Can only try then your printer go on longer but some time the other you need to clean out the waste ink it inside the printer go to open up all.



Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.

All The Best: Pineworks

Mar 30, 2009 | Canon MultiPASS MP700 All-In-One InkJet...

1 Answer

Waste ink near full


Here are the code for it

To reset waste tank full error in MP730.

1. Hit the "menu": Key
2. Hit "Copy" Key
3. Hit "#" Key
4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading
5. Hit the "3" button- this will bring up Eprom Clear
6. Hit "0" button
7. Hit the "Stop" button


Can only try then your printer go on longer but some time the other you need to clean out the waste ink it inside the printer go to open up all.



Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.

All The Best: Pineworks

Mar 26, 2009 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

My multipass 370 printer won't print


Hi
MP730.

1. Hit the "menu": Key
2. Hit "Copy" Key
3. Hit "#" Key
4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading
5. Hit the "3" button- this will bring up Eprom Clear
6. Hit "0" button
7. Hit the "Stop" button


Can only try then your printer go on longer but some time the other you need to clean out the waste ink it inside the printer go to open up all.



Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.

All The Best: Pineworks

Mar 14, 2009 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

Waste ink sign


Hi can try this
To reset waste tank full error in MP730.

1. Hit the "menu": Key
2. Hit "Copy" Key
3. Hit "#" Key
4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading
5. Hit the "3" button- this will bring up Eprom Clear
6. Hit "0" button
7. Hit the "Stop" button


Can only try then your printer go on longer but some time the other you need to clean out the waste ink it inside the printer go to open up all.



Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.

All The Best: Pineworks

Jun 07, 2008 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

Stupid Canon MP730 waste ink nearly full message


Hello please try this

To reset waste tank full error in MP730.

1. Hit the "menu": Key
2. Hit "Copy" Key
3. Hit "#" Key
4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading
5. Hit the "3" button- this will bring up Eprom Clear
6. Hit "0" button
7. Hit the "Stop" button


Can only try then your printer go on longer but some time the other you need to clean out the waste ink it inside the printer go to open up all.



Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.

All The Best: Pineworks

May 26, 2008 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

CANON MP730 ERROR MESSAGE 343 WASTE INK FULL


1-press the "menu" key
2-press the"copy" key
3-press the"#" key
scroll thru the menu heading until you come to "counter"
press "ok"
press "menu"
and select "clear all" it will ask you to "please wait"
then press menu two times
restart your printer
it will work

Feb 22, 2008 | Canon MultiPASS MP730 All-In-One InkJet...

Not finding what you are looking for?
Canon MultiPASS MP730 All-In-One InkJet Printer Logo

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96683 Answers

old marine
old marine

Level 3 Expert

1479 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...