- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
To access a wiring diagram for your Autopage RF220 installed in your Jeep, you should:Consult the installation manual that came with the Autopage system. It typically includes wiring diagrams and instructions for installation.If you don't have the manual, check the Autopage website or contact their customer support to see if they provide wiring diagrams for your specific model.Additionally, you may find wiring diagrams or information in automotive repair manuals or forums related to your Jeep model and Autopage system.Remember to follow the wiring diagram and instructions carefully during any installation or troubleshooting to ensure proper and safe operation.
IT IS POSSIBLE THAT THE ALARM HAS FAILED. WHAT YEAR IT THE TRUCK. THE WIRING WILL BE AT THE KNEE BOLSTER. YOU WILL SEE A YELLOW HEAVIER GAGE WIRE THAT IS THE IGNITION WIRE.THE WIRE WILL BE CUT AND SPLICED INTO THE ALARM WIRING . JUST CUT AND SPLICE THE WIRE TOGETHER AND SEE IF IT STARTS. DEPENDING ON THE DETAILS OF THE TRUCK YEAR AND SUCH. WIRE CAN CHANGE COLOUR, POST TRUCK DETAILS AND I CAN POST WIRING DIAGRAM.
The Autopage XT-42LCD is used to operate two systems, the RF-420LCD and RS-622. Since you state that you need to activate a remote start that narrows it down to the RS-622. You can download the manual for this unit at the following link:
×