Question about Baby Lock Imagine
My Babylock Imagine serger is frozen again. Had put it in the shop and it worked okay for awhile, now it is frozen.
SOURCE: Babylock Imagine Wave serger
There is a plate on the machine:
- If it says 220 volts, there is nothing that can be done, it cannot be used here. You should have supported an American dealer because you are totally hooped.
- If it says 110 to 120 volts, it should be working with your new plug. but since it is not working, you will have to bring it to a service shop.
- If it says 110 - 220 volts, it should be working with your new plug. but since it is not working, you will have to bring it to a service shop.
Posted on Oct 11, 2007
Make sure that the presser foot dial (the silver "knob") on top of the machine is not too loose. You can adjust this w/ a nickel; tighten it all the way down & then loosen about 4 full rotations for cotton fabrics. Also make sure the Differentail feed lever is on "N". You can order a book from your local Baby Lock dealership for all models. Good Luck.
Posted on Jun 18, 2009
Tips for a great answer:
May 08, 2014 | Euro-Pro 534DX Mechanical Sewing Machine
Jul 14, 2012 | Sewing Machines
Jun 09, 2012 | Baby Lock Imagine
Feb 09, 2012 | Baby Lock Imagine
Mar 23, 2010 | Baby Lock Imagine
Feb 18, 2010 | Baby Lock Imagine
Apr 15, 2009 | Baby Lock Imagine
Dec 18, 2007 | Baby Lock Eclipse Serger
Jun 06, 2014 | Baby Lock Imagine
96 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: