Question about Samsung HL-R5667W 56" HDTV

1 Answer

Samsung HL-r5667w TV shuts down on its own.

Hello, We have a 2 year old Samsung HL-R5667W tv. We have been having problems with it just shutting down on its own every couple minutes. When it does this the on/off switch lights up with the following. (Timer/Lamp/Stand by temp)

last night we watched TV and it did not do it, this morning my children were watching TV and it was doing it.

Thank you for your time.

Posted by on

  • 1 more comment 
  • Anonymous Dec 16, 2008

    My samsung is doing the same same thing. it is powering on and off by its self. It only stays on our off for like 3 secounds. I have tried unplugiing it still the same problem!

  • cdub19702 Dec 16, 2008

    Thank you for the quick answer TVGUY171, do you have any idea on what a new color wheel would cost? I am out in the country about 200 miles from the nearest service center, just curious as to how much its going to cost me to fix this thing.



    Thank you.

  • cdub19702 Dec 17, 2008

    Thank you very much.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 106 Answers

You may have a colorwheel going bad. The bearings start going out and this is an indication of the failure. The colorwheel is located in the light engin e therefore you may want to get a qualified tech to look at it

Posted on Dec 16, 2008

  • tvguy171
    tvguy171 Dec 16, 2008

    I am on the road right now. Give me a couple of hours and I will prvide you with a part number and a ball park price

  • tvguy171
    tvguy171 Dec 17, 2008

    Depending on the model tv you, there are two different colorwheels. To find the correct colorwheel you need the full model number (it will be HLR5667WX/XAA or something of that nature) and also the version. The version can be found on a sticker on either the left or right side of the TV. The sticker will have the model number, serial number and the version. The version will be SP01 , BF02 or something like that. The cost of either of the colorwheels is around $100 just for parts. Good luck and let me know if I can be of further assistance

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a samsung HL-R5667W . It has started to wine really bad like a fan is going out . then the picture started to flip colors before it went out. if you let it cool down it will play for a short while...


Ur tv have a colors wheel design it it.100% ur colors wheel is dead,require replacing.Huming or winning motor noises or colors fades flips or flashes black&white wthin pictures.The colors wheel is the causes and dying not spinning inside it motor axis anymore.The colors wheel sit way back of the tv,require take out alots of the tv manchanical parts out,before it can take out and replace it.U have no machanical skills don't tries this.Hire a tv tech. to replace the colors wheel.

Jan 13, 2011 | Samsung HLR5667W 56" Rear Projection HDTV

1 Answer

Screen on my HL-R5667W DLP is fading from the left


Ur tv have a convergence problems.The 2 STK convergence ICS are defective and dying.The shop will fix this for u about $300-350 for parts and labors.

May 08, 2010 | Samsung HLR5667W 56" Rear Projection HDTV

1 Answer

Samsung DLP HL-R5667W not turning on. Showed


Purple spots means Bad Light Engine Part number is BP96-00822J Encompass Parts Has them for
$950.00 - $350.00 core price Part $600.00
1-800-638-3328 Lamp# BP96-01073A

Ballast Board# BP47-00027A

Jan 08, 2010 | Samsung HL-R5667W 56" HDTV

1 Answer

I have a Samsung HL-R5667W that is about 3 1/2 years old. The screen is dark except for occasional flickers of light. The lamp appears to be giving off light when I look in the back. I replaced the bulb...


Hi my name is Eric,
I hope I can help you with your issue ,
Most likely your colorwheel is bad,
second possibility is the digital board.
Both are for a technician to install, you could do more damage poking around inside the TV.
 
 
 
If I have helped you with your issue please click accept.
If you have more questions you can still respond until this post expires,
I will reply asap
Thanks
Eric

Sep 26, 2009 | Samsung HL-R5667W 56" HDTV

1 Answer

Samsung dlp hl-r5667w


This Tv make a lot problems with the color wheel and fan thermostat, lamp cool. Need be check the color wheel first. I am suggested dont have nothing on the back cover ( make hot or not ventilation). More information parts at tritronicsinc.com Thank you

Aug 12, 2008 | Samsung DLP HL-P5663W 56" TV

1 Answer

Hl-r5667w


I just responded to your other post check the connection between the lamp and ballast at both ends. Also did you get the same exact lamp as your old lamp, as Samsung has two different arc gaps and they wont work if you get the other type even though they look the same physically.

Jun 21, 2008 | Samsung HL-R5677W 56" HDTV

1 Answer

Samsung DLP TV HL-R5667W shuts off intermittently


Afraid there is no simple answer to this. This set has multiple things that could shut it down, one may be the balest needs a upgrade , this could be why it seems to be eating lamps. Another is what sounds like a fan is a color wheel , these have known problems of failing, and when this happens sometimes they shut down the set. And finaly does the set have good ventalation, overheating can cause huge problems with this set

Feb 13, 2008 | Samsung DLP HL-P5663W 56" TV

1 Answer

Samsung DLP HL-R5667W


Your set has a defective color wheel. This is the noise you hear and why the set wont even come on now. The colors were bleeding because the color wheel was getting stuck and when you hit the set you unstuck it. You need to call a tech to put in a color wheel the part is about 100 dollars plus labor.

Feb 05, 2008 | Televison & Video

1 Answer

Samsung DLP HL-R5667W


Color Wheel problem.. to generate colors on a dlp the light is shine through a motorized wheel. that has different color filters on it. this is a motor and anthing that moves will eventally wear out. i just replaced the color wheel on a samsung today. standard for this to go out in about that time. i believed our shop charged 250 to put a new one in. Willie@FORDTV.COM

Sep 23, 2007 | Samsung DLP HL-P4663W 46" Rear Projection...

Not finding what you are looking for?
Samsung HL-R5667W 56" HDTV Logo

921 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74473 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...