Question about Wasp WLR 8900 (633808501020) Handheld
I had to move my wasp scanner from one computer to another. I hiiked it up to a usb adapter that links both my keyboard and Wasp to the same USB port like I had it on the other computer. Any suggestions to make it work?
SOURCE: problem with scanner
Yeah, from the manual, scan the following settings:
It's best to copy the necessary barcodes from the manual at 200% zoom, into a Word document and print it out.
Posted on Jan 03, 2008
Desativar opção: Conert to EAN/13 Conforme manual abaixo:
Posted on Apr 18, 2009
There is a slide on the bottom of the unit, move it to unlock position and slide battery out. Reverse procedure for installing the new one.
Posted on Apr 30, 2010
SOURCE: Hello, I have charged the
Perhaps the battery has moved (due to a shock of the device) and is not connected (as it should be in the device).
Open the device and check that the battery is connected properly.
Then try to recharge.
Also, it's a good idea to remove the battery and test (with a voltometer) that it has some voltage.
Finally, if the battery was used for a long time or charged too often (without the battery being fully decharged), you might have to replace it.
If I were you, I would replace it with a stronger battery. according to specs, WWS500 have a 700mA battery, I would put a 100mA battery instead.
Posted on Aug 01, 2011
Tips for a great answer:
Mar 19, 2014 | Wasp WWS800 Handheld
Feb 06, 2013 | Wasp Barcode Technologies Wasp WWR2900...
Jul 19, 2012 | Wasp Technologies Inventory Control...
Jul 20, 2011 | Wasp WWS800 Handheld
Sep 02, 2010 | Wasp WWS800 Handheld
Apr 30, 2010 | Wasp WWS800 Handheld
Mar 05, 2010 | Wasp Nest WCS 3900 CCD Barcode Scanner...
Sep 18, 2009 | Wasp WWS800 Handheld
Jun 11, 2009 | Wasp WWS800 Handheld
Dec 12, 2008 | Kanecal CCD Barcode Scanner -USB...
Jan 29, 2013 | Wasp WWS850 Bluetooth Wireless Scanner...
225 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: