Question about Minolta magicolor 3100 Laser Printer
Our magicolor 3100 has suddenly stopped printing any images and keeps coming up with the message - waiting on input end job. I have tried printing from 2 separate macs with the same result, it will only print text pages. We replaced the cyan toner the day before, would this have anything to do with it? I opened the drawers to check the cartridge had been installed properly and then it flashed up briefly 'image unit missing'. I shut it down and on repowering it went back to the original waiting on input message. Any ideas? Thanks.
Try to clear all the waiting jobs, a printer keeps the undone jobs in memory, Sometime that can cause you problems like that, The printer waiting and waiting and waiting.
Rightclick on the printer icon
check for printerjobs in the queue..if there are any.
Good lyck to you
Posted on Dec 16, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Aug 12, 2013 | Minolta magicolor 3100 Laser Printer
Feb 05, 2013 | Konica Minolta magicolor 4750EN Laser...
Jan 04, 2011 | Minolta magicolor 3100 Laser Printer
Ensure that all cables are securely connected. First, make sure that the printer cable connecting your computer to your printer is connected securely. Then, make sure that the power cord is inserted into a wall outlet. Try your print job again after you have ensured that all cables are properly connected.
Clear a paper jam if your printer is not responding or you are receiving a "Paper Jam" error message on your printer. To clear a jam, first open the rear output door by pushing down on the two levers on each side of the door. Opening the rear door simply makes it easier to clear a jam. Open the top cover on the front of the printer by pressing the release button on the right side of the printer. Locate the paper jam and use two hands to gently remove the paper jam. Try your print, scan, fax or copy job again.
Clear stored or saved faxes if you are having trouble sending or receiving faxes. Old faxes may be stuck in the fax queue, which may be causing the printer to not respond. To remove stored faxes, press the "Menu" button on the printer and select "Fax Functions." Then select "Clear Saved Faxes." Wait for the queue to clear and try your fax job again.
Remove paper from the automatic document feeder (ADF) input tray if your scan job is coming out crooked. The ADF input tray can only hold up to 50 sheets at a time. If there are more than 50 sheets in the input tray, the output may appear skewed. Try your scan job again after removing the paper.
Adjust your computer monitor's display settings if your scanned image is not an accurate representation of the original image. This can be done in the "Control Panel" in Windows. Set the settings to the highest possible resolution and try your scan job again.
Perform a power cycle on your printer if the previous steps were unsuccessful. To do this, turn off your printer, then unplug it from the wall. Wait a few minutes and plug the printer back in. Try your print, scan, fax or copy job again.
Oct 04, 2010 | HP LaserJet 2840 Printer
May 27, 2009 | Konica Minolta magicolor 2400 Laser...
Mar 12, 2009 | Office Equipment & Supplies
224 people viewed this question
Usually answered in minutes!