- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It sounds like a defective toner cartridge. You can try removing it and shaking it well and then Reinstalling it. Power the machine off and back on and see if it works. If that doesn't work you can try another toner cartridge. Also if the cartridge is empty and you keep installing it, it will disable the cartridge and the code will come up immediately when that cartridge is inserted.
We have bought this machine on Date-28/07/2011 and it is still in warrenty. now already 11,000 copies put it And the now machine shows F2 indication after starting and the company not repairing it. And the after sell service of company is not good.We tell the company to change the the machine or repair and they neither repairing it nor changing the part. I request you to solve my problem please.
if printer is working, printing but no scanes detecting, change usb cable and usb port on pc. If you can see your scaner in control panel scaner and imaging devices, so scan with adob photoshop, import from - your scanner.
From the service manual, doesn't look good.
A technicain will have to look at the printer.
RFID Reader I/F Error
An interface error was detected with the RFID reader device.
01 : communication error between the RFID reader and the engine PCB.
02 : the transceiver circuit error of the RFID reader.
03 : communication error between the RFID reader and the Tag chip.
04 : the RFID Tag detection error (more than 4 chips).
If rebooting the machine does not improve the symptom, you need to
check the device.
attach printer your new pc. pc on and printer power on. detect your printer than install driver in your new pc through printer driver cd.
if no detect your printer than right click my computer than properties than hardware than device manager than select any and top option scan for hardware changes, detect your printer and install driver.
Could you clarify, is this a laptop or a desktop computer?
Please check device manager and tell me what do you see there, right click on my computer or computer which you will find either on the desktop or in the start menu. Select Manage. Then on the left side, see the device manager, now look on the right, do you see any unknown devices or any with ? yellow mark on them? how about cd/dvd drives?
Please contact your local service representative or original point of purchase for help.
The Service Call indicator looking like a spanner or wrench: shows that an error requiring inspection by service representative has occurred in the device.
If the problem is a sensor malfunction, you may be able to solve it and turn the indicator off using one of the following methods.
Turn the main power of the device off and on again.
If some parts or supplies were replaced recently, try removing them, replacing them again, and then turning the main power of the device on off and on. (If the device is interpreting imperfect parts detection as an error.)
The device might be interpreting extreme changes in temperature as an error. Turn off the main power switch, wait for a few minutes to cool it off, and then turn it on. Note:
If a fax is being sent or received, or printer data is being received, turning the main power of the device off may result in data loss. Ensure that the device is not being used for faxing or printing before you try turning the main power of the device off.
Note that "main power" means the actual, physical power switch.
HP PSC, Officejet, and Photosmart All-in-Ones - The Error Message 'No HP Devices Detected' Occurs When Opening HP Solution Center (c00762521)
Issue When opening HP Solution Center, a message appears that states "No HP Devices Detected ".
Solution one: Check connections and status
Check to make sure that the device cables are connected securely at each end.
Make sure the device is turned on and not in an error state. If unsure, turn the unit off and then back on again.
Try to access the device through Solution Center again.
If the device is still not detected, proceed to Solution two.
Solution two: Check that there is a printer icon in the printer folder
Click Start and then Settings or Control Panel .
Click Printers or Printers and Faxes .
Make sure there is an icon for the printer you are trying to use.
If there is no icon and you are connecting via a USB cable, disconnect the cable, and restart the computer. Reinsert the HP software CD and choose Add a device . Connect the unit when prompted by the installer.
If there is no icon and it is a wireless connection, run the wireless setup wizard as outlined in the product setup guide, then reinsert the CD and choose Add a device .
If there is no icon and it is an Ethernet connection, reinsert the CD and choose Add a device .
Solution three: Check that the Digital Imaging Monitor is running
NOTE: If you chose a custom install and did not select HP Digital Imaging Device Functions, the Digital Imaging Monitor will not be installed. Proceed to Solution five.
Press the CTRL , ALT , and Delete keys at the same time to open the Task Manager.
Look to see if HPQTRA08 and HPQSTE08 are running.
If they are not running, restart the computer and then try again.
If they are still not showing in the list, proceed to Solution four.
Solution four: Check that the HPZPML driver is running
In Windows XP and 2000, click Start , Control Panel , Administrative Services , and then click the Services Icon . Scroll through the list looking for HPZPML to make sure it is set to automatic and that it is running.
In Windows 98/ME, open the Task Manager by pressing CTRL , ALT , and then Delete . The file HPZIPM should be listed.
If the HPZML or HPZIM file are not available, restart the computer. If they still do not show up, proceed to Solution five.
Solution five: Uninstall and reinstall the software
Insert the software CD into the CD-ROM drive of the computer. The software installer should automatically start.
If the software installer does not automatically start, complete the following steps:
Click Start and then Run .
On the Open line, type D:\SETUP , where D is the letter of the CD-ROM drive.
Click OK .
Click Uninstall on the installer screen. If Uninstall is not an option, the software installation was incomplete. Click Install .
Follow the onscreen instructions until the printer software is completely installed.
CauseThere are several reasons this can happen. The device was not connected during the installation of the software, there is no printer icon in the printer folder, the Digital Imaging Monitor is not running, or the HP service PML driver is not running.