Question about Konica Minolta bizhub 250 All-In-One Laser Printer

1 Answer

We just bought a konica 7030, and we have an f-35-10 code.

We bought this about a year ago, and we just now got around to trying to use it, but we have an f-35-10 call repairman code, and was wondering if we could reset it ourselves?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 45 Answers

Yes you can !! but the problem comes from the fixing unit (low temperature).
to remove the code (and chack if it apperas again) stop the copier, then push at the same time the 2 and the 25 button (it's called the "25 mode") then, whitout push off the button, start eh copier - stay on the 2 and 5 button - it may appear a new menu - if not try the 3 and 6 button - stop, 3 and 6, then start - then retry the 25 mode)
in the 25 mode, you will have the 'dip switch menu' - be very careful with this menu, ti chages a lot of things!! then type 3 - 1 and type on OFF . restart the copier. if the F35-10 code come again, you'll have to change the fixing unit - and no user can say whanit appears. sometime, it can appear after a long period of shut off or, if the copier is somewhere cold...

Posted on Jan 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code 2,250,200


Re: Error code 2250,2 or 2155,33 on scanner 9000f - Canon ...

community.usa.canon.com/t5/Printer.../Error-code-2...2.../123789
Nov 6, 2014 - Dear all Canon staff, I brought my 2 years ago. And I had not used it for around 1 year. When I used it again, Scangear run out error code 2,...

Sep 05, 2015 | Printers & Copiers

2 Answers

Konica Minolta bizhubc552 error c8102


Here is the error code definition: C8102 Turn around pressure welding alienation trouble
•During a pressure motion being performed, the reverse roller sensor (PS7) output does not change from H to L. •During a retraction motion being performed, the reverse roller sensor (PS7) output does not change from L to H. Further research yields this possible fix, since this model is in the same family as yours: http://www.copytechnet.com/forums/konica-minolta/89213-konica-minolta-bizhub-452-error-code-c-8102-a.html

Apr 06, 2015 | Konica Minolta Printers & Copiers

1 Answer

Develop ineo 501, machine stopped, showing " have the fusing unit replaced soon, contact the service representative" -no error code. There is also "license management error occurs" but this promt was way...


that unit is manufactured my konica minolta. it is a Konica Minolta Bizhub 501 and will use the same fuser even though the image units, toners, and transfer belt have to be chipped for the ineo. There is a picofuse in the fusing harness that blows as soon as it is installed and that starts the fuser life counter. the counter is reset when a new fuser (or new fuse, if the fuser is still good) is installed. You will need to replace the fuser for the message to go away.

Jan 05, 2015 | Printers & Copiers

1 Answer

How do i reset the error code c2704 in konica minolta press c6000/7000


Thread 2704

Abnormality in the black charging unit.
Possible causes:
Black charging unit
HV Unit
Print Control Board

Best guess is that you have a faulty charge unit. Try swapping the units around with another colour and see if the fault code shifts.

Nov 01, 2014 | Konica Minolta bizhub Printers & Copiers

1 Answer

Why am i still getting error code 0500 i bought a new fuser unit.


You need to reset the machine, the new fuser does not reset the machine.

May 03, 2014 | Konica Minolta magicolor 1690MF All-In-One...

1 Answer

ERROR CODE C0860


DID you mean C-0960!!! C-0860 does not exist in the service manual. Check your bypass tray right side. For something jammed if no need to get a tech out for Konica Minolta. I believe there was a technical bulletin issued in regards to that error several years ago.

Mar 26, 2013 | Minolta Di3510f Bizhub Copier

1 Answer

Grrr...! Okay, I had the 1400 for 2 years, loved


If you've only bought it 2 months ago it will still be under warranty.

Apr 22, 2010 | Epson Stylus 1400 InkJet Photo Printer

1 Answer

MFP Board for Konica-Minolta BizHub 252C


If it's under a year it's still under manufacturer warranty.
Call Konica-Minolta and talk to tech support. Even if you don't have the receipt they know where and when you bought the unit ( if you bought it at a recognized dealer). They should send you a return ground label to send back the unit and fix it free of charge. You will still need to give them a credit card (in case it is more damaged than you claim), but if it's in good condition they will honor the warranty.( I had one that was only a couple of weeks from expiring from the warranty and they told me they would send the label.)

In any case try this site

http://www.precisionroller.com/catalog_display.php?fm=0&step=3&MfrID=297&ModelID=7540&CategoryIDs%5B%5D=41

Jul 30, 2008 | Konica Minolta Printers & Copiers

2 Answers

Error code 27


The error code p27 the toner density sensor unplugged/dirty/faulty
Any problems please get back to me
thank you

Feb 19, 2008 | Printers & Copiers

5 Answers

Error code


toner chip is gone replace cartrige

Oct 08, 2007 | Konica Minolta magicolor 2430 DL Laser...

Not finding what you are looking for?
Konica Minolta bizhub 250 All-In-One Laser Printer Logo

1,009 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Printers & Copiers Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5695 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

George Mclaughlin

Level 2 Expert

330 Answers

Are you a Konica Minolta Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...