Question about GE 19TVR62 19 in. TV/VCR Combo

1 Answer

19" ge tv/vcr combo receives vhf channels but not uhf

Antenna worked on old tv

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

When i turn on , few seconds later goes off ..help

Posted on Dec 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change panasonic tv from UHF to VHF


UHF is only the higher air channels, all you have to do is put on cable and scan.

Feb 27, 2009 | Panasonic PV-M1349 Combo

1 Answer

Local channel went digital, lost signal.


You need a digital to analog convertor box to recieve the digital signal.

All UHF+VHF signals will be digital starting in June.

Thanks for using FixYa - a FixYa rating is appreciated.

Feb 20, 2009 | Combination Televisions

1 Answer

Connect to Converter Box


There are a fews ways of accomplishing this.


On the back of your converter box and TV/VCR there are two coxial connections an (OUT) and an (IN):

Step 1. Connect the coxial cable from the antenna to the (IN) connection on the back of the converter box.
Step 2. Connect one end of a spare coxial cable to the (OUT) connection on the back of the convert box.
Step 3. Connect the other end of the Coxial cable to the back of your TV.

I hope that you find this solution helpful. Please take a moment to rate tis solution.

Jan 19, 2009 | Panasonic Combination Televisions

1 Answer

Antenna/Cable Switch


You can get a 75 Ohm to 300 Ohm balun from a local Radio Shack Store and connect it to VHF antenna but you won't be able to receive off the air signals for very long because in about a month all TV signals will be being broadcast in Digital Format nationwide and all you will receive is SNOW. You'll need to also buy a Digital to Analog conversion unit as well to receive off the air programming. Sorry for the bad news but that's the advancement of technology and mandates from our government (FCC).

Hope this helps and Happy New Year,

Backyard_Jim

Dec 31, 2008 | Symphonic WF-719 19 in. TV/VCR/DVD Combo

1 Answer

Only goes to channel 13


It probably has to do with a setting in your menu. Usually it is the antenna category. Change it to Cable or CATV.

Mar 18, 2008 | RCA T19408 19 in. TV/VCR Combo

1 Answer

Toshiba mv13j2c antenna problem


What sort of antenna have you connected to this set?

Feb 26, 2008 | Combination Televisions

1 Answer

Line in is stuck on my samsung combo tv


If you cant get the TV off Line In, use the remote or channel up, it should go to ch2. If not, unplug TV for 30 minutes and try again. You may have to have an antenna or source that is active on another source to be able to change off L1. Sony TV's have a menu option that allows you to activate or deactivate other inputs so maybe L1 is the only input that is active.

Feb 17, 2008 | Samsung CXJ1964 19 in. TV/VCR Combo

1 Answer

RCA model f32649


Hi, Based on your post/description, it would appear that the TV tuner of the RCA is at fault. Chances are the the VHF Low is not working right but the VHF High is. This is an inshop repair probably requiring component replacement. You may want to confirm by checking your TV's setup in the menu, you should have Cable selected instead of Air or STd and do a Memory + (scan and add channels). If still a no go, then back to the tuner suspect. The VCR will not display any movie since it normally transmits in Channel 3 (which is VHF Low). If there are no other problem with the VCR then you might still be able to use it by connection it to the A/V inputs of the TV. If the VCR works in A/V mode, then perhaps you may want to save the repair expense of the RCA TV and use the tuner of the VCR to watch TV and switch channels. Post back should you need additional information. Good luck and kind regards.

Aug 23, 2007 | RCA B27TF680 27 in. TV/VCR/DVD Combo

1 Answer

I have the 13 inch and...


If you get channels 2 to 13 nice and clear but the rest are snowy, it means that the TV is set to the broadcast channels, which means that for the channels above 13 it is tuning in the old-fashioned UHF channels. If the TV is set to the cable mode then it tunes in cable channels above 13. To do this, enter the menu and navigate to the tuner settings, set the tuner to standard cable and then do the autoprogram, and the tuner's memory will be set for your cable system.

Aug 03, 2007 | Emerson EWC1903 19 in. TV/VCR Combo

1 Answer

Can receive only channels 1 thru 27 although connected to cable with 70 channels.


First you need to check if your set is in the cable mode and not antena mode,if the set is in cable make sure is in the standard cable mode and not another type of cable like HRC,if it is change it and try the autoprogram to set the available channels.I hope it helps.

Sep 11, 2006 | Panasonic PV-M1349 Combo

Not finding what you are looking for?
GE 19TVR62 19 in. TV/VCR Combo Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Combination Televisions Experts

The Knight
The Knight

Level 3 Expert

68157 Answers

Mike

Level 3 Expert

4331 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a GE Combination Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...