Question about Kodak EASYSHARE 5300 All-In-One InkJet Printer

1 Answer

Help with instructions

Need instructions on how to replace the printhead. Just got my new one with no instructions. Help me Thank you.

Posted by on

  • ghost_rid782 Dec 20, 2008

    I need the instructions to remove and install my new printhead.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Open the printer and remove the cartridges. You should see a bullseye logo with a thumb icon. There is a little press catch on the underside of the black plastic bar just above the bullseye. Press it in and the printhead will be released.

Posted on Dec 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

New 6500 OfficeJet installation issues -doesn't recognize printhead


you will need to contact HP for replacement parts here is there technical support # 800-474-6836 they are open 24-7

Oct 30, 2009 | HP Officejet 6500 Wireless All-in-One...

1 Answer

Replacement of printhead for easyshare 5300


kodak offers free replacement of printheads,if u have new printhead, log on to www.kodak.com/go/printheadsupport and u can see how to install new printhead. call kodak 1800 421 6699 for further issues

Jul 18, 2009 | Kodak EASYSHARE 5100 All-In-One Printer

2 Answers

Replacing printhead in Kodak 5300 All in One Printer


Hi, Here's a link to view step by step instructions. If this helps you plz rate this 'fixya'. If you need more help leave a comment & I'll be happy to help you further. Thank you kindly.

http://www.kodak.com/global/en/service/products/ekn033540.jhtml?pq-path=9104#

(click on the 5th question on the page)







Feb 13, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

5 Answers

Installation of printhead on Kodak 5300 All-In-One printer


Its hard to find but there is a black release button above the bullseye, press up on it and the
printhead will release, take out same way was put in.

Jan 20, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

How to remove a printhead from Kodak 5300


You can email tech support for instructions or call the toll free number below. These are the instructions for my KODAK 5100 from Kodak tech support.

Thank you for contacting Kodak technical support. If you should have any questions regarding the replacement of the printhead for your KODAK All-in-One Printer, support is available at 1.800.421.6699, 7:00 A.M. to midnight, 7 days a week.

Please check the following information how to install it:
a) Follow these instructions for step-by-step guidance on how to remove and replace your printhead.
b) If your printer is not powered on, press ON.
c) Lift the printer access door and wait for the carriage to move to the center position.
d) Remove any paper that may be loaded in the printer.
e) Remove both ink cartridges.
f) Unlatch the used printhead by pressing the button on the left.
g) Lift the used printhead out of the carriage.
h ) Remove the 3 plastic protective shields from the new printhead.
i) Place the printhead into the carriage
j) Push firmly against the back wall of the printehad until you hear a load snap.
k) Intall the new ink cartridges and make sure you hear the click into position.

If you need further assistance, please contact our Kodak technical support available at 1.800.421.6699, 7:00 A.M. to midnight, 7 days a week.

Jan 16, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Need instruction on how to replace the printhead on a kodak 5300


when replacing the printhead you will see a number of circles at the back of the print head , you press on this and the print head will snap in place, I found this very difficult initially as you do need to use some force. Actually I phoned Kodak help line and they directed me how to replace the print head on the phone, Kodak appear quite happy to solve problems and if you find it still difficult they will guide you. Apparently these kodak printheads are a common fault and need a regular replacement when the printing loses colour!!

Dec 16, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

12 Answers

Replacing printhead in Kodak 5300 All in One Printer


on this website:
http://www.kodak.com/global/plugins/acrobat/en/service/manuals/AiOPrinters/printhead/AUR1780-9_UE_RevC.pdf

You can find illustrated instructions on how to remove the old printhead, as well as on how to put the new printhead back in place.

You can easily go to that website by going to:
www.kodak.com/go/printheadsupport 

and selecting the second option "installing new printhead".

Nov 05, 2008 | Kodak EASYSHARE 5100 All-In-One Printer

2 Answers

Printhead needs replacing


The printhead is completely user replaceable and need no complicated instructions.

1. Remove the ink ribbon.
2. Looking from above, find a small shiny lever to the right of the printhead.
3. Lift the lever with your hand and remove the printhead by pulling it upwards (make sure the printer is cold).
4. Reverse the procedure to install the new printhead.

Be blessed.

Oct 31, 2008 | OKI MICROLINE 320 Turbo Matrix Printer

4 Answers

Kodak 5500-printhead problems


Above the thumb print in the printhead there is a button. Press button and printhead releases.

Oct 10, 2008 | Kodak EASYSHARE 5500 All-In-One InkJet...

Not finding what you are looking for?
Kodak EASYSHARE 5300 All-In-One InkJet Printer Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Printers & Copiers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Michel Smith

Level 3 Expert

1218 Answers

Sajid Najmi
Sajid Najmi

Level 1 Expert

31 Answers

Are you a Kodak Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...