Question about Fisher and Paykel GWL11 Top Load Washer

2 Answers

Ecosmart gw11 fisher paykel

My washer will not turn on ive check power supply and all that stuff, ive heard there is fuses in the power module but dont know where that is

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Unplug from the wall. in the motor control module, remove the screws holding it down. mark and remove the connectors. carefully lifting it out, flip it over,to the warranty sticker. pop it in half, and you will see wires soldered to the back of the board with a fuse holder. 5a 250v

Posted on Nov 16, 2013

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 145 Answers

Hello and welcome. Couple things to check first-

Tip the machine back and look underneath at the water pump, if it is wet or appears crusty/corroded, you probably have a shorted pump that took the machine control out along with it. Sometimes you can just replace the pump but on those models the board can become a casualty. Also look at the control itself and check for water in the pan area underneath it. Sometimes the mixing chamber thermistor leaks and it will short out the machine control. Whenever you replace the control, a new seal should be put on the thermistor. (easy and cheap insurance)

You might want to start with a fisher paykel gwl11 service manual:

Posted on Dec 18, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2007 dodge nitro so the fuses for my door locks and wiper pump keep blowing. Took the fuse box out checked all the wires. There is no exposed wires or wires crossing. Anything else it could be.

What # fuse's J5 25amp , J4 25amp , M 30 15amp , M13 20amp M33 10amp . All these fuse's are power supply's for door modules and to the wiper / washer switch . The washer pump is controlled by the totally integrated power module . I suggest you google TIPM - dodge totally integrated power module . Chrysler , Dodge , Jeep all use this componet . Also watch youtube videos on finding a automotive electrical short . That's what you have a direct short to ground on those power supply circuits

Dec 14, 2016 | 2007 Dodge Nitro

1 Answer

Fisher and paykel ecosmart 96193-a wont drain

Fisher and Paykel might be able to supply a repair manual.

May 20, 2014 | Fisher Paykel EcoSmart GWL15

1 Answer

Connecting motor controller in gw11 washer

There is raised print below the socket with the name for the plug that goes in that socket.

Feb 15, 2014 | Fisher and Paykel Washing Machines

1 Answer

Location of fuse in Intelligent Module

Fuse panel B contains fuses that supply power to washer functions. 25A fuses 34 and 33 and 30A fuse 32 supply power to the vehicle electrical system control module. 30A fuse 38 supplies power to the wiper motor control module. 5A fuse 19 supplies power to the rain/light recognition sensor. 30A fuse 36 supplies power to the headlight washer relay. 10A fuse 15 supplies power to the instrument cluster control module for washer fluid level sensing. 10A fuse 13 supplies power to the windshield wiper/washer switch in the steering column electronic systems control module. In addition, 5A fuse 20 supplies power to the washer nozzle heaters. Troubleshooting all this could lead to an answer.

Jan 28, 2014 | 2007 Audi A6

1 Answer

Fisher and Paykel EcoSmart GWL15 no power

Hi from retired Englishman in SW France,

Check that the washer supply is OK using another item - a kettle for instance. If it's not check your breakers/fuses. Reset/replace if necessary and if the same thing happens ( or if there was nothing wrong with the breakers/fuses in the first place) sorry but with such a fault it is virtually impossible for anybody on this forum to remotely guess what could be wrong with your washer. It could be internal wiring/plugs sockets, control panel switches, control PCB.

I fear that your only real option is a service call as the engineer will have the right equipment to safely diagnose what is wrong.

If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C

Jul 22, 2011 | Fisher Paykel EcoSmart GWL15

1 Answer

2002 intrepid 2.7 Im getting no crank from the starter and I dont hear the fuel pump kicking on when the ignition key is turned on, I do get power to the radio and dash, Ive checked fuses and replaced...

Under the hood, there should be a fuse block. Remove the cover and there will be a 20amp(i think) fuse that protects the fuel pump and starter circuit. I've run into this problem many times and every time it ends up being the starter that blows the fuse.

Jun 19, 2011 | 2002 Dodge Intrepid

2 Answers

Tv turns off and dont want to turn on again

check outlet power by connect other device, check power cord if OK check then unplug tv and open the back cover and check power filter fuse power filter is the one that you hooked power cord if OK check power supply board fuses if OK check the power supply board for bad blown components .good luck

Apr 29, 2010 | Westinghouse LTV-32w1 32 in. HD-Ready LCD...

1 Answer

99 town and country quit now even the warning lights dont come on

from ignition switch
key to run
black/orange power to fuse 11 and 12 in junction block and fuse 1 in power ditribution center
power to
dark blue
dark green/red
power all times
check the maxi fuses

Mar 13, 2010 | 1999 Chrysler Town & Country

1 Answer

I have a fisher & paykel ecosmart washer no water

Please make sure that your water supply lines are properly connected and turned on. Also, there are typically small filters at the end of the hoses where they connect to the washer. Check those and clean them if necessary. Since the hoses will be disconnected at that time, flush the lines by running the water into a nearby drain or bucket.
Hope this helps! Rate my solution!

Jan 05, 2010 | Washing Machines

Not finding what you are looking for?
Fisher and Paykel GWL11 Top Load Washer Logo

593 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Owen Barnes

Level 3 Expert

867 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides