Logitech webcam driver running on VISTA

You can download the WEBcam driver from the Logitech support WEB site, click on this link and select your model WEBcam to download :- http://www.logitech.com/en-au/webcam_communications/webcams?wt.mc_id=usym_/quickcam_global&strf=Universal_Symlink

Visit the Logitech website and browse the photo gallery for your model and click on the photo to navigate to the support page.
Note - Older models on page 2 - look for the link at the bottom right of page 1 and click on it "Still can't find your product?"

http://www.logitech.com/index.cfm/405/&cl=us,en?prodcrid=405

In addition to the Logitech installer you will need to check the support software - Microsoft DirectX . This comes pre-loaded on most Windows computers but has to be updated - I am currently on version 11
To start the DirectX Diagnostic Tool, click 'Start', click 'Run', type dxdiag in the Open box, and then click OK
Run through the tabs checking the 'notes' windows for information
The version will be shown on the 'Systems' tab

Procedure to re-install Logitech software
Close all programs while uninstalling - downloading and uploading software
Disconnect your webcam
Uninstall the current webcam software on your computer
Restart computer
Download the Installation package from Logitech
Run the installer and choose your options during the installation - You may not want Logitech Chat but the Desktop icon for the webcam toolbar is a must.
Connect your webcam when prompted.

Visit the Logitech website and browse the photo gallery for your model and click on the photo to navigate to the support page.
Note - Older models on page 2 - look for the link at the bottom right of page 1 and click on it "Still can't find your product?"

http://www.logitech.com/index.cfm/405/&cl=us,en?prodcrid=405

In addition to the Logitech installer you will need to run the support software - Microsoft DirectX . This comes pre-loaded on most Windows computers but has to be updated - I am currently on version 11
To start the DirectX Diagnostic Tool, click Start, click Run, type dxdiag in the Open box, and then click OK.

Procedure to re-install Logitech software
Close all programs while uninstalling - downloading and uploading software
Disconnect your webcam
Uninstall the current webcam software on your computer
Restart computer
Download the Installation package from Logitech
Run the installer and choose your options during the installation - You may not want Logitech Chat but the Desktop icon for the webcam toolbar is a must.
Connect your webcam when prompted.

Visit the Logitech website and browse the photo gallery for your model and click on the photo to navigate to the support page.
Note - Older models on page 2 - look for the link at the bottom right of page 1 and click on it "Still can't find your product?"

http://www.logitech.com/index.cfm/405/&cl=us,en?prodcrid=405

In addition to the Logitech installer you will need to download Microsoft DirectX 9 or later to support your webcam

Briefly
Disconnect webcam
Uninstall old webcam software
Restart computer
Download webcam Installer
Run Installer - look for options during the run - you may not want Logitech Chat but the webcam desktop shortcut is worthwhile
Connect webcam when prompted

Unplug your cam
uninstall any current webcam software
restart your computer
visit the logitech website - identify your cam and click on the picture
http://www.logitech.com/index.cfm/405/&cl=us,en?prodcrid=405
download the installer.
run the installation set up and note the options - you may not want the Logitech Chat but the Desktop icon is a must.
Note - you will also need DirectX download to support your webcam - this is probably covered in the installer
Connect your webcam when prompted.

Check your version of DirectX - this is required to run your Logitech - update if necessary

Install Logitech software

1) Disconnect webcam
2) Uninstall current webcam software
3) Restart computer
4) Visit the Logitech website

http://www.logitech.com/index.cfm/405/&cl=us,en?prodcrid=405

5) Scan the photo gallery and click on the photo to go to the support page for that model - note. Older webcams are on page 2 - look for the link at the bottom of page 1 on the right hand side - "Still can't find your product?"
6) Download the installer to your computer
7) Run the Install wizard - pay attention to the text - you may wish to opt of the Logitech Chat program but I recommend you install the shortcut on your desktop.
8) Connect your webcam when prompted

Disconnect webcam
Uninstall current webcam software
Restart computer
You can download software from the Logitech website
http://www.logitech.com/index.cfm/405/&cl=us,en?prodcrid=405
Browse the picture gallery and click on your model to move to the support page
When uploading decide whether to install the Logitech chat program and opt for the desktop shortcut.
Connect your webcam when prompted

here is the link for Logitech software download site.
it is for quickcam vista 32-bit.
http://www.logitech.com/index.cfm/435/254&cl=us,en?osid=13
if this is not the software you need, just go to http:\\www.logitech.com, >>support. and download the driver you need for the web cam.

how can i download cd installer of my logitech webcam quick cam*8.3.2( window) and quick cam *8.0.1( mac os*)

This problem was caused by a compatibility issue between Windows Vista and Logitech QuickCam Messenger.
Logitech QuickCam Messenger was created by Logitech, Inc..
Recommendation
—————-
To search for similar devices that are compatible with this version of Windows, visit the Windows Vista Hardware Compatibility List website online.
However, it’s not totally out of hope for owner of Logitech QuickCam Messenger who has upgraded to Windows Vista. The following hack will use Windows XP driver (a common trick to use non Vista compliant device) to install the webcam in Vista:

1. Download QuickCam 8.4.8 with driver for WinXP.
2. Install WinRAR if not already installed yet.
3. Open the setup installer qc848enu.exe and unpack its contents to a folder. Alternatively, right click on qc848enu.exe and select “Extract to qc848enu\” option.
4. Insert or plug in the Logitech QuickCam Messenger to a USB port if not already done so.
5. An “Driver Software Installation” icon in systray (notification area) should appear, which will pop up detailed message if click. It should fail, and “Add Hardware Wizard” dialog window will appear. Choose to install the driver manually by instructing the Wizard to locate and look for the web cam driver inside the Drivers folder under the unpacked folder of the qc848enu.exe setup program. You can use browser button to select the folder.
6. Windows Vista should grab the XP driver and install it properly.
7. Download the latest version (10.5.1) of Vista compliant QuickCam software from Logitech to install the software on Vista.
8. Run the setup (qc1051enu) normally. You may need to skip the detection of webcam near the end of installation process.

Voila, you can now use the Logitech webcam to capture images or use it in conjunction with video chat in IM programs such as Windows Live (MSN) Messenger, AIM Messenger, Yahoo! Messenger, Skype or run Logitech VideoCall.

i hope thist post can solve your problem


thank's


cropp