Question about Televison & Video

2 Answers

I need code to set up remote control for an AT&T u-verse system

I have an Emerson TV
27 inch flat screen
Model EWF 2703

I had the At&t tech support person on the phone for 30-40 minutes yesterday we tried several codes for my Emerson tv but were not able set up the remote. We tried maybe 30-40 codes from a list he had. He is going to call me back at 11:00 AM today to try again if I can get more specifics on the proper code.

FYI, we went through the same process to set up a recently purchased Sony and and old Sanyo and were successful.

Posted by on

  • 1 more comment 
  • Bstrickl10 Jan 04, 2009

    I am having the same problem with my Emerson 32 inch flat screen. I can't program my uverse remote to it at all. None of the codes in the manual work.

  • cyberene Jan 19, 2009

    i have a

    LC320EM9i am unable to find codes for. I west through the list from the original installation. still nothing. Has anyone come up with a solution besides buying a Harmony Remote?



  • johndbull Feb 22, 2009

    I just purchased an Emerson 32" LCD HDTV and need the cod to set up an AT&T Uverse remote to control the TV. I've tried all of them in the manual and a few besides, but none seem to do the job.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Emerson 27" code 1024
Have a good day

Posted on Jan 29, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

The ATT Uverse silver remote doesn't work well with Emerson TVs.
Most will turn off with the correct code but NOT ON.
Find the code that will turn OFF the Emerson TV.(volume should work too)
When you want to want to turn ON your Emerson TV Try This (Believe it or not)
Wave ATT Remote slowly and press ON in mid wave.
The ATT remote on frequency must be slightly off.
This works every time for me now that I know the solution.

Remember your High School Physics lesson on the Doppler Effect

Posted on Mar 03, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What is the code for programming universal remote for philips 19 in tv model 19PFL3504D/F7


How To Program A Philips Universal Remote ' Codes For ...

codesforuniversalremotes.com/program-philips-universal-remote/
Here is how to Program any Philips Universal Remote Control. Turn on the device you ... Remote Control Codes December 21, 2015 at 1:19 pm. Stephanie,

Codes For Universal Remotes ' Universal Remote Control ...

codesforuniversalremotes.com/
Universal Remote Control Codes For TV & Audio. ... Codes for Philips Universal Remotes · Sanyo TV Codes for Universal Remotes · Codes for .... I have an 19 inch Emerson flat screen and a RCA universal remote. Please help with the code ..

Dec 28, 2015 | Philips Televison & Video

1 Answer

Lost remote for emerson lc320em8 32 in. lcd tv, how can i adjust the screen mode to get full screen without the remote?


Hello
It is immpossible to set its screen resolution or screen size, without it remote control. Try to get one original remote control, from the authorised service center for Emerson at your town, or buy a universal remote control, which have setup codes for Emerson TV with it. OK.

Feb 09, 2012 | Emerson LC320EM8 32 in. LCD TV

1 Answer

I want to use an antenna on my emerson 2703 flat screen, but the menu doesn't have an antenna option . how do i get the antenna to work?


either you plug the antenna in ... or you cant use an antenna and have to buy another which allows antenna

Feb 17, 2010 | Emerson EWF2703 27" TV

1 Answer

Need a romote code for HRS URC-383 for my emerson 27 inch flat screen.


If you are using Sky Remote then you can try to use these codes 0742, 0205 or 0206 for you Emerson TV which will work on all versions of the handset.

these are usually generic codes and may well work on the HRS URC-383 remote as well


Oct 04, 2009 | Emerson EWF2703 27" TV

3 Answers

Does anyone have the At&T U-verse remote codes?


Here is the list of universal remote codes given by PROSCAN in your owners manual. I hope this helps you with your problem. UNIVERSAL REMOTE CONTROL CODE LIST
For Universal Remote Control brands listed below, please use accompanying Proscan codes
and refer to your Universal Remote Control User Manual for basic instruction for changing TV code to
operate Proscan model.
Proscan codes for Sony TV=8003,8012
Proscan codes for Philips TV=1005,1006,1007,1035,1064,1216
Proscan codes for other universal remotes=272,132,134,116,040,016,024,056,019,262

May 18, 2009 | Proscan 26LB30QD 26 in. LCD HDTV

2 Answers

Remote control code for 32 inch lcd EMERSON TV


I succeeded is using the DirectTV remote control for the Emerson 42" plasma TV, by using a Samsung code. On my TV, was 10060. If this one does not work, there are a bunch of others that might work. Good luck

Feb 18, 2009 | Emerson Televison & Video

2 Answers

Emerson EF 2703 - Infrared Beam is not functioning


John,
I am having this same issue with an Emerson EWF 2702. Did you find any resolution to this. Do you know of a way to change the video input on the tv when you cant use the remote?

Thanks,
Jack

Jun 26, 2008 | Emerson EWC27T3 27 in. TV/VCR/DVD Combo

2 Answers

Remote will no longer work


Your best bet is to buy a universal remote that would work with your model television or a replacement remote from your manufacturer.

This one is pretty cheap (and may be your exact remote?)
http://www.replacementremotes.com/store/productdetailp.cfm?productid=28946

You could probably buy a universal remote cheaper at walmart or target, but the cost savings will cost you the time and hassle to program the remote (and if you buy a universal, you must make sure it works with emerson TVs).

May 12, 2008 | Emerson EWF2703 27" TV

1 Answer

Using my universal remote to control my iLo 27" Wide-Screen LCD TV


I have a ILO 27" TV Comcast had no suggestions for programming their remote. I went thru the ENTIRE code book and finally came up with one that worked: Emerson Code #0463 for my COMCAST universal remote.

Jul 14, 2007 | iLO V27DMBX Television

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

2,693 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69795 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6370 Answers

yadayada
yadayada

Level 3 Expert

63801 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...