Question about RCA D52W20 52" Rear Projection HDTV-Ready Television
Our 52in rca projection tv has been going black a few times and then turns off. once we unplugged a 2nd time, it has stayed on. sometimes it will go black and then just come back on, or it will turn off.
could this be the power switch? and if so, how do you replace it?
I posted this a while ago, but it applies here, This is a common problem with the ITC222 chassis, I would check CP120, CP140, CP150 to see if they are bad I suspect CP150 is the one that is bad. Its value is 2200uf 16VDC. It is located on the same board as the IHVT and is in between the Heat sink in the middle of the board.
I have the schematics if you need them
I hope this helps,
Posted on Dec 18, 2008
Tips for a great answer:
Feb 08, 2011 | RCA D52W20 52" Rear Projection HDTV-Ready...
Nov 11, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...
Nov 05, 2009 | RCA P52926 52" Rear Projection Television
Nov 30, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...
50 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: