Question about StarTech.com StarView SV211K 2-port KVM Switch
Since the codes were last put in my arsenal and setanta 2 do not work.They used to but now dont,i keep getting a blank screen saying bad or scrambled channel.I have tried to uninstall and then install again but this doesnt work,Pls help as i want to watch the footie!!!
Try this it should solve your problem.
Try and determine the lowest transponder frequency that you can get a signal on.
Look at the frequencies you already have on the channels saved so far and choose the lowest.
Then in the installation menu select MANUAL SCAN and set that as the frequency.
Make sure you can see a signal and scroll down to Network scan and change to ENABLE with the Right arrow.
While still highlighted, click OK.
Scanning should then begin. It will say 1/1 to start with but should then jump up to 1/?? (the ?? being 2 digits).
Posted on Dec 16, 2008
Tips for a great answer:
Jan 07, 2009 | StarTech.com StarView SV211K 2-port KVM...
Dec 16, 2008 | StarTech.com StarView SV211K 2-port KVM...
Dec 05, 2008 | StarTech.com StarView SV211K 2-port KVM...
104 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: