My Screen works for about half a movie then goes blank, Audio is still present and only after turning the unit off and back on will it come on but it only lasts for about 5 - 10 mins before cutting off again. Can anyone help?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
All cars have the video system of not playing the screen when driving, but when it spark and you must press the E-brake
the're is a switch to overpass that system and play it when the car is running
look for the switch and turn it on
or if you replace the battery it might of reset the system and you may have to move the setting around in order to work without the E-brake on
what seems to happen with these units is the connectors on the screen go bad from opening and closing numerous times. it sucks but thats what happens with these units. everything else will work but the screen goes blank because it doesn't have a good connection with the docking part of the unit
It is probably that the parking safety wire wasn't hooked up properly, or at all. Most in dash dvd players are equipped with a motion safety device to prohibit the driver from viewing movies and such on the monitor while the vehicle is in motion. The wire for this needs to be hooked to the parking brake light wiring. This will ensure that when the parking brake is on, the dvd can sense that the vehicle is stopped, and should therefore show the image.