An expert who has achieved level 2 by getting 100 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 500 times.
Re: no preview error code=00000000
Probablyhas corrupt driver. Trydisconnecting the Camera from the USB port and reinstall the CD orDownloaded software program. When the program asks you to connectthe camera to the USB port, do so and it should work. Thento use it on the Web do this. Web Camera’s have to besetup on the program they are to be used with. Just installing the cameraon your computer does not set it up to broadcast on messengers or Skype. Each program has Options that have to be setup in order forthe Audio and Video to function properly. A. Skype Setup: After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/) set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera if Installed Properly will come up and show a video picture.
Then, on the bottom of the page click on Save.
The camera and audio should function properly. Yourfriends and Family will now be able to see and her to you. B. Yahoo Setup: After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html) set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
C. Windows Live Messenger:
After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
Next go to the Menu Bar on right side, click on “ “Action.”
Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: Your audio and video should work. Enjoy. When done both the Audio and Video will function properly soyou can chat and see family or friends you are connected to. Hope this helps. Bud
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
When you connect a Universal Serial Bus (USB) Microsoft Windows CE-based device to a computer that is running Microsoft Windows 2000, the computer may halt with a "Bugcheck code 0000000A" error message on a blue screen. If you restart your computer and try to reattach the device, the error message occurs again.
This error message occurs only on computers that are using the Microsoft Wceusbsh.sys driver and ActiveSync 3.1 to synchronize a Windows CE-based device with the host computer. This problem has been noticed on legacy-free computers only (computers with no COM ports or motherboard ISA bus slots).
ChildEBP RetAddr Args to Child
f2453c98 804177ed 80431944 ff676980 ffffffff ntoskrnl!_KiTrap0E+0x27c
f2453d1c 804176fe 80473378 80473364 ff676980 ntoskrnl!ExpScanGeneralLookasideList+0x1b
f2453d2c 8046028d 00000000 00000000 00000000 ntoskrnl!ExAdjustLookasideDepth+0x18
f2453da8 804524f6 00000000 00000000 00000000 ntoskrnl!KeBalanceSetManager+0xcc
f2453ddc 80465b62 804601c8 00000000 00000000 ntoskrnl!PspSystemThreadStartup+0x69
00000000 00000000 00000000 00000000 00000000 ntoskrnl!_KiThreadStartup+0x16Not all of the parameter values will be the same on all computers. Additionally, it would be unusual to see Wceusbsh.sys in the call stack. The fault should occur after (above, in the stack) the ExpScanGeneralLookasideList function.
This issue occurs because of a problem with the way kernel lookaside lists are handled by the Windows CE Wceusbsh.sys synchronization driver.
Microsoft has confirmed that this is a problem in the Microsoft products that are listed at the beginning of this article.
Contact service mean you need to unlock it , you sim may be restricted to particular network ,If your sim restricted to particular network you need to unlock
it , to do so , I would recommend you use unlocking codes as it is one
of the safest way , Unlocking via codes is the best method for
unlocking the mobile . using the unlock code specified in this site simpleunlocking proceed unlocking your mobile . They are reliable and provide good customer support service.
Go into 'Printer' from your Control Panel and make sure the Epsom printer is shown as default ( with a check against it ) If you have more than one printer shown - delete any you do not use. Delete all documents in the queue
Go to the Epsom support and check out the help available
Fusing error 1. Press the Warm Restart switch, and “●” appears at the center on the left end of the screen. 2. Enter “3” from the 10-Key Pad. 3. Type the 8-digit service code and touch [Enter]. (Default value: 00000000) NOTE • When [END] is touched after a wrong service code has been entered, the Basic screen reappears. • At the fourth access after entries of three wrong access codes, [END] is not available on the screen. It is therefore necessary to turn OFF and ON the Main Power Switch. • If you forget the service code, it becomes necessary to replace the RAMS Board with a new one. Take necessary steps not to forget the service code. • The RAMS Board is not available as a replacement part. If it requires replacement, contact Office Printing Support Division by way of CSES.
Reset your Toners and Imaging units for Minolta Bizhub and CF series. http://www.chipreset.eu
The code is *2767*2878# with no card installed
This is a custom reset to factory default setting
This code is to enable to use your phone if it was locked
To unlock your phone to make it sim free ( any sim card can be use )
There is 2 codes that is necessary
Only 2 codes, do not do a full reset
Installed a non t-mobile sim card
The disply will shown WRONG CARD
The 00000000 will shown as - - - - - - - -
There are 2 set of 8 zeros
Wait 20 seconds
The next entry will not shown on the display, enter with care
Wait 20 seconds
Turn phone off
Turn phone on
Enter *#7465625# to check the phone lock status
All locks should be inactive
If NETWORK lock is still active