An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: E41 error on Pixma mp150
Connected Printer to a Power source, Turn off the printer if printer on
With the Printer power off, press the Power button while press and hold Stop/Reset button.
When the Power led is light, press Stop/Reset button two times while pressing and holding the Power button.
When releasing the Power button and the Stop/Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
When the on/off lights in green, press the Stop/Reset button three times to reset the EEPROM. For other specified number pressed function listed in the table below. (Each time the Stop/Reset button is pressed, the LED lights alternately in orange and green, starting with orange).
Unplug cable power from a power source.
Then plug back in and power up the unit.
The number of the Reset button pressing
Service pattern print
Waste ink counter reset If I could be of further assistance, let me know. If this helps or solves the issue, please rate it. Thanks, Joe
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I have Canon PIXMA MP210 printer but problem is that whenever i given comand for print or scan than computer show "Code: 2,114,0" this message therefor printer not print or scan. so please give me solution
Error E22, 5100 is as you say a carriage error. Check that nothing is stopping the cartridges from sliding back or fore across the silver bar inside the front of the printer. Then check that nothing is obscuring the timing slits that run across the carriage, then check that the motor that moves the belt isn't jammed or obstructed.